Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

Tri-M HPSC104-SER - 160W Rugged Smart PC/104 Vehicle Power Supply

5V, 12V & -5VSB Outputs Standard, -40 to +85 Operation

Introduction

The HPSC104-SER is a DC-DC converter that includes a flash based microcontroller and 4 amp charger for advanced power management and smart battery charging. Combined with a Tri-M standard battery pack or super cap module, the HPSC104-SER can be used as an Uninterruptible Power Source (UPS) for a PC/104 system. The HPSC104-SER is designed for low noise embedded computer systems, has a wide input range of 6 to 40 V DC and is ideal for battery or unregulated input applications.

The HPSC104-SER provides up to four stages of battery charging and can charge SLA, NiCd, and NiMh batteries and level two and three SMBus compatible batteries. Charge currents are up to 4A, and battery charging voltages from 10V to 35V DC. The HPSC104-SER has advanced power management functions that allows timed on/off control of the unit, notification of changes to main power and changes in the battery status. For example, the HPSC104-SER can be programmed to power off the main outputs in 60 seconds and then turn them on again 12 hours later. In addition to smart charging and power management the HPSC104-SER can monitor up to 16 different temperatures using digital I²C digital temp sensors. The HPSC104-SER is available as RoHS, is PC/104 compliant and rugged enough for to meet the demands on military and mining vehicle power supplies, including -40°C to +85°C extended temperature rating.

Advantages

  • High efficiency
  • Extended temperature operation
  • Rugged design
  • Clean and filtered power for the PC/104 bus
  • Power/OS
  • Smart charging

Specification

Power Supply

Input6 to 40V DC
Output(s)5V output* 25A
12V output 5A
-5V output 400mA
-12V output 500mA
V5SBY 7A

Load regulation <60mV
Line regulation +40mV
Output temp drift <40mV
Switching frequency (5V, 12V, -12V & 5VSBY) 310 to 320kHz
Output ripple <20mV
Conducted Susceptibility >57db
EfficiencyUp to 95%
BatteryMaximum battery charger current: 4A
Battery Charger output voltage range: 10 to 35V
OtherOptocoupled inputs for ignition, and system "shut-down" pushbutton.
RS232 serial port for setup, monitoring and control.
Built-in digital temperature sensor.

General

ExpansionStandard 16 bit PC/104 interface
8-bit and 16-bit bus stack through headers are installed
Electrical6V to 40V DC - see above for more details
MechanicalDimensions: 90mm x 96mm (3.55" x 3.775"), standard PC/104 sized
Conformal CoatingOn request
SoftwareN/A
TemperatureTemperature range (operation): -40°C to +85°C
Temperature range (storage): -40°C to +85°C
Weight6.56oz / 185.92g
Warranty1 Year
RoHSCompliant

Ordering Details

BoardHPSC104-SER-N-PBF
PC/104, In 6-40VDC, Out 160 Watt, 5V@ 25A, 12V@ 5A, -5V @ 400mA, -12V @ 500mA, V5SBY 7.0A, RS-232, Serial Interface, (-40 to +85°C), No Bus

HPSC104-SER-PBF
PC/104, In 6-40VDC, Out 160 Watt, 5V@ 25A, 12V@ 5A, -5V @ 400mA, -12V @ 500mA, V5SBY 7.0A, RS-232, Serial Interface, (-40 to +85°C), ISA Bus
AccessoriesOptions:
-CH Add suffix for Humiseal conformal coating and epoxy (factory installed)
-CS Add suffix for Silicon conformal coating and epoxy (factory installed)
-CU Add suffix for Urethane conformal coating and epoxy (factory installed)
-NS Non-Stack Through Bus, modifies N (factory installed)
Order Online Tri-M HPSC104-SER - Order Online