Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

Tri-M UltraUPS - Uninterruptible Power Solution with Li-Ion or Ultracapacitors

5V Output, Built-in 750mA-Hr 8.4V NiMh Battery, -40 to +85 Operation

Tri-M UltraUPS - Uninterruptible Power Solution with Li-Ion or Ultracapacitors
Key Features
UPS Solution with Li-Ion or Ultracapacitors
Up to 617 watt-hours Li-Ion backup
Up to 4.2 watt-hours ultra cap backup
RS232 port for monitoring and control
Optional internal CPU board
-40C to 70/85C temperature operation

Introduction

The ultraUPS are a series of backup power solutions for rugged and hostile environments where down time for servicing and power outages is unacceptable or uneconomical. All the ultraUPS units operate down to -40oC and the ultra capacitor units up to 85oC. The Li-Ion ultraUPS units have an operating temperature range of -40C to 70C and backup energy of 2.2 megajoules (617 watt-hours). That's enough energy to keep Tri-M's VDX104 running for over two weeks! The ultra capacitor units have an operating temperature range of -40C to 85C with backup energy up to 15 kilojoules (4.2 watt-hours). The 6 amp output of the ultraUPS units can be field adjusted programmed between 5V and 16V. The main input of the ultraUPS protects against vehicle “load dumps” and transients and is designed to MIL-STD-1275 requirements. The ultraUPS units also supports power direct from 15V or 30V solar panels.

Advantages

  • The rugged aluminum enclosure is equipped with an anti-shock pad
  • RS232 communication port for monitoring and control
  • Power good signal, remote on/off control line and a 5V standby power
  • Supports 15V and 30V solar panels for main power supply
  • Programmable 6 amp output voltage between 5V to 16V
  • Operating Temperature Range -40C to 85C (capUPS models)
  • Operating Temperature Range -40C to 70C (Li-Ion model)
  • Three LEDs provide status of input power, backup energy and output
  • Load dump and transient protected

Specification

Power Supply

Input6 to 40VDC
Output(s)6 amp output of the ultraUPS units can be field adjusted between 5V and 16V
BatteryUp to UPS of 2.2 megajoules (617 watt-hours) Li-Ion backup
CapacitorsUp to UPS of 15 kilojoules (4.2 watt-hours) ultra capacitor backup
OtherRS232 communication port for monitoring and control.
Power good signal, remote on/off control line and a 5V standby power.
Supports 15V and 30V solar panels for main power supply.
Three LEDs provide status of input power, backup energy and the output.
Load dump and transient protected.

General

TemperatureTemperature range (operation): -40°C to +85°C (ultra capacitor units)
Temperature range (operation): -40°C to +70°C (Li-Ion units)
Warranty1 Year
RoHSCompliant

Ordering Details

BoardUPS-52M2[-x]-PBF
UPS of 2.2 megajoules (617 watt-hours) Li-Ion backup

capUPS-415K[-x]-PBF
UPS of 15 kilojoules (4.2 watt-hours) ultra capacitor backup

capUPS-47K5[-x]-PBF
UPS of 7.5 kilojoules (2.1 watt-hours) ultra capacitor backup

UPS-52M2[-x]-VDX/strong>
Includes a VDX104-1E. An isolated RS-232 and Ethernet port provides remote access. The VDX104-1E is supplied with Linux ready for the customers application.

UPS-52M2[-x]-HECS
Includes the HECS datalogging stack of a VDX104-1E and TCB1522. Four isolated RS-232, one isolated RS485, dual CANbus and one Ethernet port are provided.

Where [-x] is the factory set output voltage.

Example: UPS-52M2-12-PBF; Output voltage factory set to 12V.
AccessoriesN/A