Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

Connect Tech Xtreme/104-Express - PCI/104-Express Four/Eight Port Opto Serial Interface Card

Adds 4 or 8 RS232, RS422 or RS485 Interfaces to PCI/104-Express Bus

Introduction

Xtreme/104-Express is Connect Tech's first PCI/104-Express multi-port serial board. Fully PCI/104-Express compliant, this board provides a PCI-104 pass-through connector for easy transition from legacy PCI-104 cards to PCI Express stacks.

Connect Tech's highest throughput to date, Xtreme/104-Express incorporates a fractional baud rate generator that allows almost any baud rate to be matched accurately. Fail-safe transceivers ensure glitch-free network operations, while industrial temperature grade components make certain your communications are protected from disruptions that can occur in harsh environments.

This PCI/104-Express serial board offers reliability, high data rates and longevity for military, aerospace, medical, instrumentation and industrial control applications.

All Connect Tech PCI/104-Express cards include lifetime warranty and free technical support.

PCI/104-Express Features and Benefits

  • PCI/104-Express form factor RS-232/422/485 add-in card
  • Eight high speed serial ports up to 15.625 Mbps
  • 9-bit data support with 128 byte FIFOs per port
  • Rugged filtering on all ports for immunity to EMI and noise
  • Supports RS-485 full duplex, half duplex and multi-drop slave
  • Configurable tri-state on power up per port for all RS-485 ports

Specification

Function

InterfacePorts: 8 ports
Interface: Hardware selectable RS-232/422/485
I/O Addresses: Assigned by PCI Plug and Play resources
UART: High performance EXAR UARTs with 128 byte transmit and receive FIFO buffers
Data RatesRS-232: 50 bps to 921.6 Kbps
RS-422/485: up to 15.625 Mbps
Address/IRQAssigned by PCI Plug and Play resources
OtherControl Signals:
• RS-232: TxD, RxD, RTS, CTS, RI, DTR, DSR, DCD, SG (Signal Ground)
• RS-422/485: TxD+/-, RxD+/-, RTS+/-, CTS+/-, SR (Signal Reference)
Connector(s)Two right angle, 40 pin 0.100” pitch headers
Optional DB-9 cables

General

ExpansionPCI/104-Express or PCIe/104
Required available x1 lane within a PCI/104-Express stack
Electrical5V DC @ 100mA (typical), 650mA (max)
MechanicalWidth: 96 mm x 90 mm, 3.55" x 3.775" (standard PC/104)
Conformal CoatingOn request
SoftwareWindows Windows 2000, Windows XP, Windows Vista, Windows 7, Windows 8
Windows Server 2003
Windows XP Embedded
Linux 2.4, 2.6
QNX 6
TemperatureTemperature range (operation): -40°C to +85°C
Temperature range (storage): -40°C to +125°C
Humidity95% non-condensing
WarrantyLifetime
RoHSCompliant

Ordering Details

BoardXEG003
Xtreme/104-Express 4 port hardware configurable for RS-232/422/485, 256 byte FIFOs and 9 bit data mode support. -40ºC to 85ºC, RoHS Compliant

XEG003-01
Xtreme/104-Express 4 port hardware configurable for RS-232/422/485, 256 byte FIFOs and 9 bit data mode support, DB-9 Cables. -40ºC to 85ºC RoHS Compliant

XEG004
PCIe/104 4 port hardware configurable for RS-232/422/485, 256 byte FIFOs and 9 bit data mode support. -40ºC to 85ºC, RoHS Compliant

XEG004-01
PCIe/104 4 port hardware configurable for RS-232/422/485, 256 byte FIFOs and 9 bit data mode support. DB-9 Cables, -40ºC to 85ºC, RoHS Compliant

XEG005
Xtreme/104-Express 8 port hardware configurable for RS-232/422/485, 256 byte FIFOs and 9 bit data mode support. -40ºC to 85ºC, RoHS Compliant

XEG005-01
Xtreme/104-Express 8 port hardware configurable for RS-232/422/485, 256 byte FIFOs and 9 bit data mode support, DB-9 Cables. -40ºC to 85ºC, RoHS Compliant

XEG006
PCIe/104 8 port hardware configurable for RS-232/422/485, 256 byte FIFOs and 9 bit data mode support. -40ºC to 85ºC, RoHS Compliant

XEG006-01
PCIe/104 8 port hardware configurable for RS-232/422/485, 256 byte FIFOs and 9 bit data mode support. DB-9 Cables, -40ºC to 85ºC, RoHS Compliant
AccessoriesN/A