Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

Connect Tech Xtreme/Multi-I/O - Dual CAN & Five Serial Port PC/104 Serial Card

2x CAN, 4x RS-232, 1x RS-485, 2x MultiTech Sockets for Comm Modules, -40°C to 85°C

Introduction

Connect Tech’s Xtreme/Multi-I/O features dual SJA1000 CANbus controllers, isolated serial and CAN ports, and two MultiTech Universal compatible sockets on a single PC/104 board design. This high density communication board offers an all-in-one communication solution, optimizing Size, Weight, and Performance requirements. This innovative product takes full advantage of the latest technologies in jumperless configuration, high voltage isolation and advanced communication functionality.

On-board FPGA and PIC32 microcontroller facilitate jumperless configuration of the board, with the FPGA providing a full-featured J1708 controller. Xtreme/Multi-I/O includes two galvanic isolated CANbus controllers with 2500V isolation protection and advanced networking and configuration capabilities.

The 4x RS-232 ports and 1x RS-485/J1708 port features 2500V isolation protection and individual +5VDC isolated power supplies, providing less noise and increased system protection. With USB connectivity and jumperless setup, extended operating temperature, and versatile options, Connect Tech’s Xtreme/Multi-I/O is ideal for CANbus, serial, wired and wireless communication.

Xtreme/Multi-I/O Features

  • All-in-one PC/104 communication solution for CANbus, serial port, and wired and wireless communication (including optional GPS functionality)
  • High voltage (2500V) port isolation reduces noise and increase system protection
  • Advanced CANbus functionality reduces development time, cost, and installation setup
  • Jumperless configuration with secure lock, ensuring uniformity and maximizing system security
  • Extended operating temperature for outstanding performance and reliability in harsh environments

Specification

Function

InterfaceRS-232: 4 x Isolated Ports, 921Kbp/s maximum
RS-485:
• 1 x Isolated Port, 921Kbp/s maximum
• Configurable for J1708 operation
Universal Sockets
• 2 x MultiTech Compatible Sockets, 921Kbp/s maximum
• 3.3V or 5V, up to 3.2A maximum
CAN2 x SJA1000 Controllers, 1Mbp/s maximum
OtherLED Indicators: 5 x Isolated LED’s, built-in limiting resistors
USB: 1 x USB port for easy installation setup
Aux Port Output Current: 5V, 125mA maximum
Aux Port Output Isolation: 2500V maximum
Connector(s)26 pin header connectors (optional ribbon cables with female 26 pin IDC to female DB-25 connectors available)

General

ExpansionStandard 16 bit PC/104 interface
8-bit and 16-bit bus stack through headers are installed
Electrical+5VDC ±5%
125 mA (typ)
MechanicalWidth: 96 mm x 90 mm, 3.55" x 3.775"
Conformal CoatingOn request
TemperatureTemperature range (operation): -40°C to +85°C
Temperature range (storage): -40°C to +85°C
Humidity95%, non-condensing
Weight52g (1.9oz)
WarrantyLifetime
RoHSCompliant

Ordering Details

BoardXMG001
Xtreme/MIO multi protocol board includes support for CAN, Serial, J1708 and MultiTech module interfaces.

XMG001-01
Xtreme/MIO multi protocol board includes support for CAN, Serial, J1708 and MultiTech module interfaces. Inc cables.
AccessoriesN/A