Diamond Point International
 
Kontron Embedded Modules

Kontron speedMOPSlcdPM

High Performance Intel® Pentium® M PC/104+ Board

Upto 1GB Memory, Onboard Video (LCD & CRT), USB2

 
Kontron speedMOPSlcdPM
 
  • Intel® Pentium® M 1.8GHZ or
  • Intel® ULV Celeron® M 1.0GHZ or
  • Intel® ULV Celeron® M 800MHz
  • Intel® 82855GM chipset
  • Intel® Enhanced SpeedStep®
  • Intel® Extreme Graphics 2
  • PC/104plus bus compliant
  • Upto 1GB DDR of memory
  • LAN, USB 2.0, sound onboard
  • Watchdog
  • Standard PC I/O



Datasheet/Manual:

Kontron speedMOPSlcdPM datasheet in PDF format Datasheet in PDF format
Kontron speedMOPSlcdPM manual in PDF format Manual in PDF format

 

Introduction

A breathtaking high performing PC/104plus-Bus-Compliant module with Intel® Pentium® M and Celeron® M with 800 MHz to 1.8GHz. The speedMOPSlcdPM runs with a highly integrated Intel® 855GME chipset and ICH4 southbridge. This allows to use DDR-RAM-SODIMM up to 1 GByte and provides 2x USB 2.0. The graphic engine is the Intel Extreme Graphics 2 engine with 2x32MB VRAM UMA for CRT & LCD. Special features are PC/104plus (ISA & PCI) compliant expansions as well as the JILI-Interface for instant Panel adaption. The board comes complete 2x USB, 2x COM, LPT, FDD, 2x EIDE, Keyboard, Sound and PS/2.

The speedMOPSlcdPM is a proven concept that enhances PC/104. The processor is pragmatically located outside of the typical PC/104 „sandwich" footprint that is formed when two or more PC/104 boards are attached, thus facilitating optimal cooling of high-performance CPU boards. The new form factor supports all current and forthcoming PC/104 I/O expansion modules. Since speedMOPS CPU boards fit into traditional 3.5- inch housings, the cost of enclosures is kept to a minimum. speedMOPS CPU boards provide OEMs and end users with an effectively cooled high-performance (greater than Intel® Pentium® III) solution for attachment to PC/104 expansion modules. The boards also guarantee the long-term validity of the PC/104 I/O specification, which includes the ISA bus.

All speedMOPS PC/104 boards are Plug&Work compatible, which considerably reduces the time to market. All speedMOPS PC/104 provide the same pinout for keyboard,COM1 and COM2,44pin IDE, 2xUSB, LPT as well as LAN. This is the common MOPS-family feature, which eases the upgradeability enormously within the Kontron MOPS PC/104-products.

With Kontron You stay...always a Jump ahead!

Supported Flat Panels

The list of supported panels is now too large to show in a single webpage, they are now shown in the 'flat panel selector'. To run the flat panel selector, click here and choose the speedMOPSlcdPM as the model to see what panels are supported.

 
 

Specification

Board:

PC/104plus Bus compliant
PC/104 ISA & PC/104plus PCI

CPU:

Intel® Pentium® M 745 1.8GHz, 2MB L2 cache (Dothan), fan
Intel® ULV Celeron® M 373 1.0GHz, 512KB L2 cache (Dothan), fan
Intel® ULV Celeron® M 373 800Mz, 0KB L2 cache (Dothan), fanless

Chipset:

Intel 82855GM, 400MHz FSB, integrated graphics

DRAM:

Supports up to 1 GB DDR-RAM-SODIMM, 200 pin DDR-SODIMM socket

Drives:

Bootable Flash Harddisk: Can use chipDISK IDE flash drive module up to 512 MB
1 x EIDE (UDMA-33)
Floppy Interface

Ethernet:

10/100Base-T Ethernet Interface (Intel 82551ER PCI)
Supports Intel PXE network boot

I/O Ports:

Printer Interface (SPP/EPP/ECP)
2 (16550 comp.) serial ports
2 x USB, with Legacy Support (version 2.0, 480MBits/s)
Sound
Keyboard/Mouse Controller

Graphics:

Intel® Extreme Graphics 2 Engine with 2x32 MB VRAM UMA for CRT/LCD
Dual independent display support

Other:

Watchdog Timer
Power Fail Detect
Real-time Clock
DarkBoot

Size:

96x147 mm
Plug'n Play compatible to another speedMOPS and therefore exchangeable

Operating Systems:

Compatible Operating Systems
Windows® XP Embedded
Windows® XP
Windows® NT Embedded
Windows® CE (free toolkit available - supports .NET)
Windows® 98
Windows® 95
Windows® 2000
VxWorks
Linux
DOS
Contact us for others

Power:

5V only
1.0 GHz version - up to 15W at 100% CPU load
1.8 GHz version - up to 40W @ 100% CPU load

Environment:

Temperature: operation: 0° to 60°C, storage: -10° to 85°C
Max. Humidity: operation: 10% to 90%, storage: 5% to 95% (non condensing)

ROHS Status:

This product is lead free/ROHS compliant.


Ordering Details:
Board:

01041-0000-08-2 speedMOPSlcdPM ULV Celeron® M 800MGHz, 0MB L2 (Dothan), fanless
01041-0000-10-2 speedMOPSlcdPM ULV Celeron® M 373 1.0GHZ, 512kB L2 (Dothan), fan
01041-0000-18-2 speedMOPSlcdPM Intel® Pentium® M 745 1.8GHZ, 2MB L2 (Dothan), fan

Please note that boards are supplied with no cables, software or manuals.

Accessories:

97007-2560-00-0 DDR-SODIMM-256MB (256MB)
97007-5120-00-0 DDR-SODIMM-512MB (512MB)
97007-1024-00-0 DDR-SODIMM-1024MB (1GB)

96002-0000-00-0 Cable MOPS-SET2 (cable set - see below)
96023-0000-00-0 Cable KB-1 (AT keyboard cable)
96060-0000-00-0 Cable KAB-KB-PS2 (PS/2 keyboard cable)
96015-0000-00-0 Cable DSUB25-1 (parallel cable)
96017-0000-00-0 Cable DSUB9-2 (serial cable)
96001-0000-00-0 Cable ADA-FLOPPY-2 (floppy cable)
96020-0000-00-0 Cable IDE-25 (44 to 40 way IDE cable)
96021-0000-00-0 Cable IDE-2MM (44 to 44 way IDE cable)
96054-0000-00-0 Cable USB-1 (USB cable)
96053-0000-00-0 Cable VGA-2 (VGA cable)
96048-0000-00-0 Cable ETN1 (Ethernet cable)
96019-0000-00-0 FLOPPY-MOPS-1 (replacement flat foil cable for ADA-FLOPPY-2)
See the Kontron PC/104 cable page for more details

08001-0128-00-0 128MB chipDISK
08001-0256-00-0 256MB chipDISK
08001-0512-00-0 512MB chipDISK
08001-1000-00-0 1GB chipDISK
96004-0000-00-0 chipDISK-ADA1 Adapter/cable

96047-0000-00-0 JRC1 Remote Control Software with serial cable
96051-0000-00-0 DR DOS license label

08011-0128-00-0 CFC-128 Compact Flash Type I with 128 Mbyte, industrial grade
08011-0256-00-0 CFC-256 Compact Flash Type I with 256 Mbyte, industrial grade
08011-0512-00-0 CFC-512 Compact Flash Type I with 512 Mbyte, industrial grade
08011-1024-00-0 CFC-1024 Compact Flash Type I with 1024 Mbyte, industrial grade
96004-0000-00-2 CFC-ADA1 Compact Flash Adaptor
40404 CF-CARD-Adapter CF-CARD to IDE (44pin) interface

01010-0000-00-3 PC/104-SK-PLUS3 Starter Kit for PC/104+ systems

Cable set includes keyboard, 2mm IDE cable, parallel cable, serial cable and floppy cable.

Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.

 
© 2008 Diamond Point International. All rights reserved.