Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 
Tri-M Technologies

Tri-M Technologies, Inc. BAT-SLA(25)(45)

Sealed Lead Acid Battery Backup For Tri-M Smart Charging PSU

Creates A Complete UPS System With PSU
 
Tri-M Technologies, Inc. BAT104-SLA
  
  • Nickel Metal Hydride batteries
  • BAT104-SLA25; 25 watt-hr backup capacity
  • BAT104-SLA45; 45 watt-hr backup capacity
  • Digital temp sensor
  • PC/104 footprint size, no PC/104 bus
  • Can drive 25W/45W load for 60 mins
  • Thermal fuse and current fuse protection



Datasheet/Manual:

Tri-M Technologies, Inc. BAT104 datasheet in PDF format BAT-SLA(25)(45) Datasheet - PDF
Tri-M Technologies, Inc. BAT104-SLA manual in PDF format BAT-SLA(25)(45) Manual - PDF
 

Introduction

The BAT104-SLA series includes the BAT104-SLA25 and the BAT104-SLA45. The BAT104-SLA battery backup units create a complete UPS system by plugging directly into the bottom of the HESC (including the V5SC-SER) Vehicle Power Supplies. Each BAT104-SLA includes five SLA batteries for a nominal backup voltage of 10 volts. The BAT104-SLA25 utilizes 2.5Ahr batteries for a total of 25 watt-hrs backup and the BAT104-SLA45 utilizes 4.5Ahr batteries for a total of 45 watt-hrs of backup power. Therefore a BAT104-SLA45 can supply backup power for up to sixty minutes for a 45 watt load.

The BAT104-SLA includes Mosfet transistors for preventing deep discharge occurrences during extended power outages. The Mosfet transistors electrically isolate the BAT104-SLA from the HESC whenever the BE output of the HESC is de-asserted (pulled to 5V).

The BAT104-SLA has a current activated fuse for protection against shorts on the battery output.

A digital I2C temperature sensor provides temperature feedback for ambient temperature measurement which can be read by the HESC.
 
 

Specification

Capacity:

BAT-SLA25: 5D x 2.5Ah NiMh batteries for a total of 25 watt-hours of power
BAT-SLA45: 5DD x 4.5Ahr NiMh batteries for a total of 45 watt-hours of power

Dimensions:

BAT-SLA25: 3.78" x 3.50" x 2.80" (PC/104 standard)
BAT-SLA45: 3.78" x 3.50" x 4.15" (PC/104 standard)

Board:

Fully PC/104 compliant

Temperature:

-65°C to +65°C operating

Weight:

BAT-SLA25: 40.77oz / 1155.75g
BAT-SLA45: 52.13oz / 1477.80g

MTBF:

150 years

ROHS Status:

N/A

Ordering Details:

Board:

BAT-SLA25 Sealed Lead Acid, 5D x 2.5A Hr. with digital temp. sensor
BAT-SLA45 Sealed Lead Acid, 5DD x 4.5A Hr. with digital temp. sensor

Please note that boards are supplied with no cables, software or manuals.

Accessories:

N/A

Order Online!

 

ORDER ONLINE - some models from this product range are available to order on our online webshop.

Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2012 Diamond Point International. All rights reserved.