Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 
Tri-M Engineering

Tri-M Engineering ISA104X1

ISA to PC/104 Adapter

Allows PC/104 Cards To Be Fitted Into ISA Slot
 
Tri-M Engineering ISA104X1
  
  • Full PC/104 mounting location
  • PC/104 64 and 40 pin passive stack-through
  • Operating temperature range of -40°C to 85°C
  • Secondary 8 bit location
  • ROHS compliant



Datasheet/Manual:

Connect Tech Inc. ADG013 datasheet in PDF format Datasheet in PDF format
 

Introduction

This passive extender card allows developers to mount an 8 or 16-bit PC/104 card into a standard ISA bus PC system, avoiding the need for a dedicated PC/104 stack for development work.

The adapter is equipped with a stack-through connector so the test card can be installed on either side enabling probing on the front or the back. A secondary PC/104 location allows addition of troubleshooting modules.

Standard Usage

Simply stack the test PC/104 card onto the adapter's PC/104 connectors and insert the adapter into the host system's ISA slot. No additional configuration is required
 
 

Specification
General:

PC/104 64 and 40 pin passive stack-through connectors
Operating temperature range of -40°C to 85°C
Secondary PC/104 location allows addition of troubleshooting modules
Secondary location supplies 8-bit PC/104 connector for cards up to 1.55" x 3.55"
RoHS compliant
Temperature:

Operating Temperature: -40°C to 85°C
Storage Temperature: -40°C to 85°C

Humidity:

95% non-condensing

Software Compatibility:

Operating system independent
ROHS Status:

This product is lead free/ROHS compliant.

Ordering Details:
Board:

ISA104X1 ISA Slot card design

Please note that boards are supplied with no cables, software or manuals.
Software/manuals are available electronically.
Accessories:

N/A
Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2010 Diamond Point International. All rights reserved.