Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 
Tri-M Technologies

TRI-M PC104-T

AC Termination For Any PC/104 Stack

Extended Temperature Operation Option

 
TRI-M PC104-Tn
  
  • Where n = bits (8 / 16)
  • Reduces noise on PC/104 bus
  • Uses "low power" AC termination
  • Plugs onto any PC/104 bus
  • Stackthrough / non-stackthrough
  • 8 bit and 16 bit versions



Datasheet/Manual:

Tri-M Technologies, Inc. PC104-T datasheet in PDF format PC104-T Datasheet - PDF
 

Introduction

AC termination provides increased noise immunity for mobile PC/104 applications. Vehicle environments are notoriously noisy. EMI, voltage spikes, and other noise sources can interfere with proper bus operation and corrupt data transfers. The AC termination board shown here plugs onto the end of the PC/104 stack to quiet the bus signals and increase system integrity more effectively than simple resistive termination. It can be used with any PC/104 system, with or without a PC/104 power supply module. When ordering the V104 or HE104 power supply modules, order option-TAC, and the bus termination components will be mounted right on the circuit board module without taking up additional height on the PC/104 stack.
 
 

Specification

Input voltage:

Plugs onto any PC/104 or installed onto modules
PC/104 Bus Signal Terminated with 47R and 47P RC Network
Signals are terminated with discrete components: TC C1 (330pF), Reset C20 (330pF)

Dimensions:

3.550" x 1.15"

Weight:

28.15g

Operating temperature:

-40 to +85°C (all boards)

Operating humidity:

5% to 95% noncondensing

ROHS Status:

This product is lead free/ROHS compliant.


Ordering Details:

Board:

PC104-T8 Bus Termination with 8 bit stackthrough bus
PC104-T8-NS Bus Termination with 8 bit non-stackthrough bus
PC104-T16 Bus Termination with 16 bit stackthrough bus
PC104-T16-NS Bus Termination with 16 bit non-stackthrough bus

OPT-T AC Bus Termination components can be factory configured onto HE104, V104 power supply and DEV104 Passive Backplanes. It will not add height to the board since only the components will be added

* this can be fitted to the V-104 and HE-104 power supplies as a factory option

Accessories:

-AIRCRAFT Add suffix for conformal coating & epoxy **

** option is factory installed & configured, it can not be retrofitted into existing units

Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2012 Diamond Point International. All rights reserved.