Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 
Tri-M Technologies

Tri-M Technologies, Inc. V104

25W PC/104 DC/DC Power Supply PC/104 Card

Extended Temperature Operation Option

 
Tri-M Technologies, Inc. V104
  
  • Power supply on a PC/104 card
  • Clean, filtered power for PC/104 bus
  • 25 Watts output power
  • 5V & 12V outputs as standard
  • -5V & -12V outputs optional
  • Load dump and transient protection
  • Extended temperature option
  • Accessories available



Datasheet/Manual:

Tri-M Technologies, Inc. V104 datasheet in PDF format Tri-M V104 datasheet - PDF
Tri-M Technologies, Inc. V104 datasheet in PDF format Tri-M V104 manual - PDF
 

Introduction

This rugged, economical DC/DC power supply is designed specifically for mobile PC/104 computing applications. It consists of a PC/104 form factor module with complete DC-DC voltage regulator circuitry, heat sink, input and output connectors, power-good indicator, and both 8-bit and 16-bit PC/104 bus headers. Simply stack your CPU and other cards on top or below the power supply module to provide power to your PC/104 system.

The input range of 8-30VDC is compatible with most vehicle batteries, and the 25W total output power is sufficient for many applications. Load dump and transient protection circuitry protect your PC/104 computer system from hazards on the main power supply. Standard output voltage configurations are +5/+12V; additional outputs of -5V and -12V are available as well (see ordering information). The V104 is compatible with several accessories & a battery to enhance your system's performance.
 
 

Specification

Input voltage:

8 - 30VDC
12-20V AC input (option)

Total output power:

25W max (total of below)
+5V output 5A max
+12V output 1A max
-5V output (optional) 400mA max
-12V output (optional) 160mA max

Efficiency:

Up to 85%

Output ripple:

50mV p-p (+5V line)

Quiescent current:

22mA

Dimensions:

3.550" x 3.775"

Board:

Fully PC/104 compliant

Operating temperature:

0 to 70°C
-20 to +80°C option
-40 to +85°C option

Operating humidity:

5% to 95% noncondensing

MTBF:

164 years

ROHS Status:

This product is lead free/ROHS compliant.


Ordering Details:

Board:

V104-512-16-PBF V104 with +5V & +12V outputs
V104-5-16-PBF V104 with +5V output only

-PBF indicates rohs compliance

Please note that boards are supplied with no cables, software or manuals.
If you require the free CD please ensure this is on your purchase order.

Accessories:

Options
-5V Add suffix for -5V output option for above **
-12V Add suffix for -12V output option for above **
-512V Add suffix for both -5V and -12V output options for above **
-T Add suffix for AC termination option **
-AC/IN Add suffix for AC input option **
-ET Add suffix for extended temperature (-40 to +85°C) **
-AIRCRAFT Add suffix for conformal coating & epoxy **
-PM104 Add suffix for power management unit **
-PM104 Cable Set Add suffix for cable set for PM104 module
-BC104 Add suffix for battery charger 1.0A **
-RPD Add suffix for reverse polarity diode protection **
-BATT-IN Add suffix for battery input option **
-TRANSORB High Power Load Dump Transient Protector
-ON/OFF Remote on/off
-CH Add suffix for Humiseal conformal coating and epoxy (factory installed)
-CS Add suffix for Silicon conformal coating and epoxy (factory installed)
-CU Add suffix for Urethane conformal coating and epoxy (factory installed)

** option is factory installed & configured, it can not be retrofitted into existing units

Example V104-512-16-512V-T-PBF V104 PSU, +5V, +12V, -5V and -12V outputs, AC termination option, rohs.

Order Online!

 

ORDER ONLINE - some models from this product range are available to order on our online webshop.

Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2012 Diamond Point International. All rights reserved.