Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 
Connect Tech Inc

Connect Tech Bluestorm/SP Opto

Full Height PCI Serial Card With 3kV Isolation On Each Port

Four Switchable RS-232/422/485 Serial Ports
 
Connect Tech Bluestorm/SP Opto
  
  • 32-bit Universal PCI
  • Four ports
  • Switchable RS-232/422/485
  • Supports full duplex (4 wire) with RTS/CTS flow control, half duplex (2 wire) with auto TxD echo cancellation and multidrop (4 wire) modes in RS-422/485
  • Bi-directional data speeds up to 1.8432 Mbps (RS-422/485)
  • Selectable for tri-state on power up in RS-422/485 mode
  • 3kV optical isolation
  • Operating temperature range of 0°C to 70°C
  • Built for installation in a standard height chassis
  • RoHS compliant



Datasheet/Manual:

Connect Tech Bluestorm/SP Opto datasheet in PDF format Bluestorm/SP Opto Datasheet - PDF
Connect Tech Bluestorm/SP Opto manual in PDF format Bluestorm/SP Opto Manual - PDF
 

Introduction

The BlueStorm/SP Opto offers the added protection of optical isolatation for your critical applications. The BlueStorm/SP Opto is an extension of the BlueStorm product family and available as a standard profile card only.

Dependability, high speed data transfer rates and 3kV of optical isolation protection makes these cards ideal in environments where harsh conditions may disrupt communications.

Available with four ports of RS-232/422/485 connectivity, these BlueStorm/SP Opto cards are compatible with 3.3V and 5V PCI slots.

Bi-directional data speeds up to 1.8432 Mbps (RS-422/485) ensure fast data aquisition and communications.

All BlueStorm/SP Opto products are FCC certified and CE marked. Lifetime Warranty and free technical support is also included.
 
 

Specification

Number of ports:

4 ports

Electrical Interface:

Hardware selectable RS-232/422/485

Connectors:

RJ-45 (RJ-45 to DB-9 cables supplied as option)

Control Signals:

RS-232: TxD, RxD, RTS, CTS, SG (Signal Ground)
RS-422/485: TxD+/-, RxD+/-, RTS+/-, CTS+/-, SR (Signal Return)

Baud Rates:

RS-232: 50 bps to 921.6 Kbps
RS-422/485: 50 bps to 1.8432 Mbps

Interrupts:

Assigned by Plug and Play resources

Memory Addresses:

Assigned by Plug and Play resources

UART Type:

Dual UARTs with up to 64 byte transmit and receive FIFO buffers for each port

Dimensions:

Length: 14.702 cm/5.788"
Height: 10.605 cm/4.175"

Power Requirements:

3.3V or 5V

Environmental:

Operating Temperature: 0º to 70º C
Storage Temperature: -55º to 125º C
Humidity: 95% non-condensing

Bus:

Universal PCI: 3.3V or 5V PCI bus

Software Compatibility:

Windows NT4, 2000, XP (32 and 64 bit), Vista, Windows 7
Windows 2003 Server, 2008 Server
Windows XP Embedded
QNX 4.0, 6.0
VxWorks
Linux 2.4, 2.6
Ardence RTX for Windows
Windows CE 5.0
SCO Unix/Openserver
Solaris 10 (32-bit)

Surge Supression:

FCC Class A
ICES-003 Class A
EN 55022
EN 55024

Optical Isolation:

3kV optical isolation

Regulatory Approvals:

FCC Class A
ICES-003 Class A
EN50082-2
EN 55022 Class A
EN 55024

ROHS Status:

This product is lead free/ROHS compliant.

Ordering Details:

Board:

BSG001 BlueStorm/SP Opto, 4 ports RS-232/422/485
BSG001-01 BlueStorm/SP Opto, 4 ports RS-232/422/485, RJ-45 to DB-9 cables

Accessories:

N/A

Order Online!

 

ORDER ONLINE - these products are available to order on our online webshop.

Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2012 Diamond Point International. All rights reserved.