Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 
Quatech

Quatech ThinQ Wireless Device Servers

RS-232/422/485 Serial - Wireless Ethernet Device Servers

Connect RS-232/422/485 Devices To Your Desktop Via Wireless LAN!

 
Quatech Wireless Device Servers  
  • 1 or 2 independent ports
  • RS-232, RS-422 or RS-485 ports
  • Built in webserver for configuration
  • Supports 64 & 128-bit WEP and WPA
  • Embedded 802.11b wireless
  • Surge suppression option
  • Windows NT/2000/XP & Linux support
  • 5 year warranty



Datasheet/Manual:

Quatech Wireless Device Server Datasheet in PDF format Datasheet in PDF format
Quatech Device Server manual in PDF format Quick Start Guide in PDF format
Quatech Device Server manual in PDF format Manual in PDF format
 

Introduction

When you need the ultimate in wireless device server performance, ease of use and flexibility, specify Quatech.

Quatech makes it easy to get started.

An intuitive Installation Wizard gets you up and running quickly, automatically searching local and remote subnets for installed device servers within seconds of inserting the installation CD-ROM.

Any network settings automatically assigned by DHCP networks are displayed for confirmation, or enter a static IP address easily using the Installation Wizard – you won't need to bother with telnet sessions, MAC address data entry or special cables.

The wireless device servers may be managed through the Windows® Device Manager interface or a Web browser, so you can count on trouble-free configuration and maintenance long after the initial installation is completed. Ad-Hoc and Infrastructure modes are supported, as are WEP and WPA protocols to help safely secure data transfers.

With excellent power and receive sensitivity, the embedded DPAC Technologies™ 802.11b radio provides maximum performance in a small device server footprint.

Overcome limitations of serial protocols by network enabling your devices

Serial (RS-232/422/485) devices are used in thousands of diverse industries including:

  • CNC/DNC Applications
  • Energy Management
  • Security & Access Control
  • Government & Defense
  • Materials Handling & Logistics
  • Intelligent Traffic Systems

Yet, while serial protocols have proven to be reliable and robust, there are drawbacks – cable lengths are limited and expensive, COM ports are often in short supply on the host PC, and the attached serial devices are not remotely accessible for monitoring, service or support. A wireless device server overcomes all these limitations. Its hardware and drivers are invisible to connected serial devices and their software applications, routing data through an IP network to“virtual" COM ports installed on the host PC by the Installation Wizard.

Support for multiple serial protocols made simple

The 100 Series is designed for RS-232 applications and offers an optional +5V output on the serial connector to power devices. The 400 Series introduce a new software-selectable Multi-Electrical Interface, enabling RS-232, 422 or 485 on all ports without jumpers or switches.
 
SSEW-100D

SSEW-100D
1 port RS-232
Wireless Device Server
 
SSEW-400D SSEW-400D
1 port RS-232/422/485
Wireless Device Server
 
DSEW-100D DSEW-100D
2 port RS-232
Wireless Device Server
 
DSEW-400D DSEW-400D
2 port RS-232/422/485
Wireless Device Server
 
 

Specification
LAN Interface
General:

10/100 Base T (IEEE 802.3) auto-negotiation
Auto MDI/MDIX and RJ-45 Ethernet connector
Wireless Specifications
Technology:

IEEE 802.11b DSSS, WiFi Compliant
Frequency:

2.4 – 2.4835 GHz (US/Can/Europe/Japan)
2.471-2.497 Ghz (Japan)
Channels:

USA & Canada: 11 channels
Europe: 13 channels
Japan: 14 channels
France: 4 channels

Data Rates Supported:

11, 5.5, 2, 1 Mbps
RF Power:

65 mW (Typical)
Sensitivity:

-82 dBm @ 11Mbps, -86 dBm @ 5.5 Mbps
-88 dBm @ 2 Mbps and -90dBm @ 1 Mbps
Security:

WEP standard encryption, 64/128-bit
WPA encryption
Antenna:

2.2 dBi Rubber Duck Antenna, supplied and attached to RP-SMA bulkhead connector
Serial interface (RS-232 or RS-232/422/485)
General:

Each port is a fully independent asynchronous DTE serial port, with:

  • Full modem control
  • Hardware flow control
  • Optional 10-pin RJ-45 adapters for DB-9M connections are available
Data rates:

Serial port supports data transfer speds of up to 921.6 Kbps, depending on flow control protocols used, cable length and condition, and other factors
Surge Suppression Option:

(Standard on 5V Models)
Surge suppressor is capable of sustining up to 40-A peak, 8 x 20-μs transient surges, a clamping voltage of 30V (RS-232 mode) or 15.5V (RS-422/485 mode), and a peak energy dissipation of 0.1 Joules.
Protocols and software
Management:

UDP, TCP/IP, HTTP, DHCP, ARP, SNMP
Initial IP address configuration:

DHCP, static IP set within the Installation Wizard or a custom UDP datagram utility (with command line interface) for unattended installations.

Quatech provides several ways to manage, monitor and configure wireless device servers after installation:

  • Windows® Device Manager (Quatech Device Manager in Windows NT)
  • On-board HTML pages accessible from a standard web browser
  • Simple Network Management Protocol (SNMP)
  • Intellisock™ TCP socket services
Communication modes:

Normal, Tunneling, Raw TCP, Auto TCP, Raw UDP or Intellisock TCP socket services

OS support
General:

Device drivers provided for Windows NT, Windows 2000, Windows XP, and Linux
Raw TCP, Raw UDP, Tunneling, AutoTCP and IntellisockTM modes are O/S independent
Hardware
Chipset:

Conexant Prism™ 3 Wireless Chipset
CPU:

Freescale™ PowerPC®
SDRAM:

8 MB
Flash Memory:

2 MB (FLASH is field upgradeable)
Power:

+5V models limited to 500mA max current draw per port (fuse-protected)
Other
Operating:

0° C to 70° C
Storage:

–40° C to 70° C
Relative Humidity:

10% to 90% non-condensing
PSU:

AC adapter provided for 100VAC–240VAC, 50Hz–60Hz operation
+5V, 2A (10 W) max DC, with auto-sensing
Power Consumption:

+5V, 0.7A(3.5W)
Certifications:

FCC, Industry Canada, CE
Dimensions:

Length: 4.69" (11.91 cm)
Width: 3.33" (8.46 cm)
Depth: 1.18" (2.99 cm)
Weight: 15.1 oz. (428.0 g)
Accessories:

Surge Suppression
DB-9 to RJ-45 Adapters
International Power Cords
DIN Rail Mounting Kit
RS-422 & 485 Termination Blocks
ROHS Status:

This product is lead free/ROHS compliant.

Ordering Details:
Board:

SSEW-100D 1 port RS-232 wireless serial device server
SSEW-100D-SS 1 port RS-232 wireless serial device server with surge protection
SSEW-100D-5V 1 port RS-232 w/+5V wireless serial device server
SSEW-400D 1 port RS-232/422/485 wireless serial device server
SSEW-400D-SS 1 port RS-232/422/485 wireless serial device server with surge protection
DSEW-100D 2 port RS-232 wireless serial device server
DSEW-100D-SS 2 port RS-232 wireless serial device server with surge protection
DSEW-100D-5V 2 port RS-232 w/+5V wireless serial device server
DSEW-400D 2 port RS-232/422/485 wireless serial device server
DSEW-400D-SS 2 port RS-232/422/485 wireless serial device server with surge protection

Quatech cards come in a retail box with manual/driver CD and cable (where necessary)
Accessories:

SS1 Surge suppression package for 1 ports
SS2 Surge suppression package for 2 ports
TERM-422-D9F Termination Pack (RS-422)
TERM-485-D9F Termination Pack (RS-485)
SSE-DIN Din Rail Mounting Kit
Order Online!

 

ORDER ONLINE - some of these products are available on our online webshop.
Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2008 Diamond Point International. All rights reserved.