Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

Kontron XMC-ETH2/PMC-ETH2 - Dual Gigabit Ethernet PMC or XMC with RJ45

Designed For Embedded Applications

Kontron XMC-ETH2/PMC-ETH2 - Dual Gigabit Ethernet PMC or XMC with RJ45
Key Features
Dual Gigabit Ethernet PMC/XMC with RJ-45
Two 10/100/1000 BaseT Gigabit Ethernet ports
Two standard RJ-45 interfaces
Intel® 82571 Gigabit Ethernet controller
XMC PCI Express™ Gen 2.0 x8 interface or
PMC PCI 32 bit/33MHz or 66MHz on P1/P2
0 to 55°C, -40 to 70°C or -40 to 85°C operation

Introduction

XMC-ETH2/PMC-ETH2 Ethernet Mezzanine is designed to fit any VME, VPX or CompactPCI Single-Board Computer in the market.

XMC-ETH2/PMC-ETH2 provides two-gigabit copper links selectable in front or rear. When power on the P5 connector is detected, the bus interface is selected to be a PCI Express interface with four lines. Otherwise, it switches to PCI 33 MHz or 66MHz, 32 bit on PMC connectors. The PMC PCI interface is compatible with 5V and 3.3V V(I/O) voltages. Rugged conduction-cooled builds feature a PMC version with PCI connection and an XMC version with PCI Express.

Specification

Ethernet/WLAN

Interface(s)Two Gbit RJ-45 sockets
Controller(s)Dual Channel (Intel® 82571) Gigabit Ethernet Controller
Connection(s)Two 10/100/1000 BaseT Ethernet links either configurable on front RJ45 (with LED signaling) or to the rear P4

General

ExpansionAutomatic or manual selection between PCI 32 bit/33MHZ (up to PCI 32 bit/66MHz) on P1/P2 and PCIe® link with 4 lanes on P5
Alternatively, there are two build options for rugged versions:
- PMC with PCI connection from PCI 32 bit/33MHz or 66MHz on P1/P2
- XMC with connection speed from one PCIe® link with 4 lanes on P5
ElectricalPower Supply: 3.3 V
Maximal Power Requirement: 5 Watts
When operated through the XMC PCI-E interface, the VPWR XMC power (+5V or +12V) should be present so that PCI-E interface detection is done
Mechanical74 mm x 149 mm x 8.2 mm
Form factor:
• IEEE P1386 - Standard Air
• VITA 20 - Conduction Cooled
Conformal CoatingConformal coating on request
SoftwareLinux, Windows, VxWorks
Other Drivers on request
TemperatureSA - Standard Commercial:
• Operation: 0 to +55°C
• Storage: -45 to +85°C
• 1.5 m/s airflow required, convection cooled
• VITA 47-Class AC1
RA - Rugged Air-Cooled:
• Operation: -40 to +71°C
• Storage: -45 to +100°C
• 1.6 m/s airflow required, convection cooled
• VITA 47-Class AC3
RC - Rugged Conduction-Cooled:
• Operation: -40 to +85°C option
• Storage: -45 to +100°C
• No airflow required, conduction cooled
• VITA 47-Class CC4 option
HumiditySA - Standard Commercial: 95% without condensation
RA - Rugged Air-Cooled: 95% without condensation
RC - Rugged Conduction-Cooled: 95% without condensation
Weight90 g with heatsink (SA and RC build)
AltitudeSA: -1,640 to 15,000 ft
RA: -1,660 to 33,000 ft
RC: -1,640 to 50,000 ft
VibrationSA - Standard Commercial: 20-500 Hz - 2g
RA - Rugged Air-Cooled: 20-2,000 Hz - 3g
RC - Rugged Conduction-Cooled: 20-2,000 Hz - 5g
ShockSA - Standard Commercial: 20g/11 ms Half Sine
RA - Rugged Air-Cooled: 40g/20 ms Half Sine
RC - Rugged Conduction-Cooled: 40g/20 ms Half Sine
MTBFXMC-ETH2-RC-000: 498 092 h Ground Benign 25°
PMC-ETH2-RC-000: 484 700 h Ground Benign 25°
Refer to manual for other models/temperatures
EMCEMC qualifications EN55082 (Ed. 09/95)
EN55022 (Ed. 22/94) class A
Warranty2 Years
RoHSCompliant

Ordering Details

BoardXMC-ETH2-SA-000
XMC-ETH2 Air-Cooled Commercial Build, front and rear Ethernet ports, PCI PMC and PCIe XMC interface

XMC-ETH2-SA-000V
XMC-ETH2 Air-Cooled Commercial Build, front and rear Ethernet ports, PCI PMC and PCIe XMC interface, conformal coating

PMC-ETH2-SA-000
PMC-ETH2 Air-Cooled Commercial Build, front and rear Ethernet ports, PCI PMC only interface, no P5 XMC connector

PMC-ETH2-RA-000
PMC-ETH2 Rugged Air-Cooled Build, front and rear Ethernet ports, PCI PMC only interface, no P5 XMC connector

PMC-ETH2-RC-000
PMC-ETH2 Rugged Conduction-Cooled Build, rear Ethernet ports only, PMC configuration, no P5 XMC connector

XMC-ETH2-RC-000
XMC-ETH2 Rugged Conduction-Cooled Build, rear Ethernet ports only, XMC configuration, no P1/P2 PMC connector
AccessoriesN/A