Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

MEN Mikro P511 - Dual Fast Ethernet PMC

2 Full-Duplex or Half-Duplex Channels, -40 to +85°C Qualified

Introduction

The P511 is a 32bit/33MHz PMC with dual Ethernet functionality. The two channels can be accessed via two RJ45 connectors which are led to the front via an adapter cable from a SCSI connector. They support half duplex and full duplex operation.

The PMC offers the possibility to buffer all receive and transmit Ethernet frames either in a local or in an external data buffer. This makes it possible to provide a Worst Case Execution Time analysis which makes it particularly well suited for safety-critical applications.

Up to 6 GPIO lines can be used on the module for additional functionality.

The P511 is based on the USM concept. USM Universal Submodules make PMC modules more flexible than ever. The Ethernet functionality is realized via an IP core implemented inside its onboard FPGA. This function can be changed at any time through implementation of different IP cores. The corresponding line drivers are realized on the USM which is simply plugged on the P511. One alternative function is the combination of an Ethernet core with a fieldbus interface to build gateways.

The I/O mezzanine module is suitable for any PMC compliant host carrier board in any type of bus system, i.e. CPCI, VME or on any type of stand-alone SBC in telecommunication, industrial, medical, transportation or aerospace applications. It offers long-term availability for at least 10 years and is qualified for operation in the extended temperature range.

Specification

Ethernet/WLAN

Function32MB SDRAM memory
• Soldered
• DDR2
• 132MHz memory bus frequency
• FPGA-controlled

2MB non-volatile Flash
• For FPGA data and Nios® firmware
• FPGA-controlled

Standard factory FPGA configuration:
• Main bus interface
• Interrupt controller, SMBus controller
• 16Z087_ETH - Ethernet MAC IP core (2 IP cores for the 2 channels)
• 16Z043_SDRAM - SDRAM controller
• 16Z045_FLASH - Flash interface
• 16Z034_GPIO - GPIO controllers (2 IP cores, for onboard LEDs and 8-bit I/O)
The FPGA offers the possibility to add customized I/O functionality
Interface(s)Ethernet Interface
• Two 10/100Base-T Ethernet channels
• Accessible on two RJ45 connectors via adapter cable
• Half duplex/full duplex support

GPIO
• Up to six lines controlled via software
Connection(s)Via front panel on a shielded 50-pin HP D-Sub SCSI 2 receptacle connector
Adapter cable to two RJ45 connectors included in the delivery

General

ExpansionCompliant with PCI Specification 2.2
32-bit/33-MHz, 3.3V V(I/O)
Target and initiator
ElectricalIsolation voltage:
• 500 VAC
Supply voltage/power consumption:
• +5V (-3%/+5%), 40mA
• +3.3V (-5%/+5%), 139mA
MechanicalDimensions: conforming to IEEE 1386.1
Conformal CoatingConformal coating on request
SoftwareWindows®
Linux
QNX®
TemperatureTemperature range (operation):
• -40..+85°C (qualified components)
• Airflow: min. 1.0m/s
Temperature range (storage): -40..+85°C
HumidityRelative humidity range (operation): max. 95% non-condensing
Relative humidity range (storage): max. 95% non-condensing
WeightWeight: 78g
Altitude-300m to + 3,000m
Vibration(sinusoidal): 1g/10..150Hz
ShockShock: 15g/11ms
Bump: 10g/16ms
MTBF1 305 649 h @ 40°C according to IEC/TR 62380 (RDF 2000)
Safety/CertificationPCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers
EMCConforming to EN 55022 (radio disturbance), IEC1000-4-2 (ESD) and IEC1000-4-4 (burst)
Warranty2 Years
RoHSCompliant

Ordering Details

Board15P511-00
Dual Fast Ethernet, 2 Ethernet cores, 6 GPIO signals, front I/O, for convection cooled systems, -40..+85°C with qualified components
Accessories05P000-01
25 mounting screw sets to fix PMC/XMC modules on carrier boards

05P511-00
P511 Ethernet HDSUB to 2 x RJ45 cable, -40..+85°C