Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

MEN Mikro P506 - Quad CAN Bus Interface PMC

4 Independent Channels, -40 to +85°C Operation

Introduction

The P506 is a 32-bit/33MHz PMC with four CAN interfaces. They support CAN Protocol Version 2.0A/B, standard and extended data frames, remote frames, 0..8 bytes data length and a programmable data rate of up to 1 Mbit/s.

The P506 is based on the USM concept. USM Universal Submodules make PMC modules more flexible than ever. The CAN bus interfaces are realized via four IP cores implemented inside its onboard FPGA. This function can be changed at any time through implementation of different IP cores. The corresponding line drivers are realized on the USM which is simply plugged on the P506.

The I/O mezzanine module is suitable for any PMC compliant host carrier board in any type of bus system, i.e. CPCI, VME or on any type of stand-alone SBC in telecommunication, industrial, medical, transportation or aerospace applications. It offers long-term availability for at least 10 years and is qualified for operation in the extended temperature range.

Specification

Function

CANCompliant to ISO 11898-1 and ISO 11898-2
Four channels
CAN Protocol Version 2.0A/B
• Standard and extended data frames
• 0..8 bytes data length
• Programmable data rate up to 1 Mbit/s
Support for remote frames
5 receive buffers (FIFO-scheme)
3 transmit buffers with prioritization
Maskable identifier filter
Programmable loop-back mode for self-test operation
Signaling and interrupt capabilities for receiver and transmitter error states
Other32MB SDRAM memory
• Soldered
• DDR2
• 132MHz memory bus frequency
• FPGA-controlled

2MB non-volatile Flash
• For FPGA data and Nios® firmware
• FPGA-controlled

Standard factory FPGA configuration:
• Main bus interface
• Interrupt controller, SMBus controller
• 16Z029_CAN - CAN Controller
• 16Z043_SDRAM - SDRAM controller
• 16Z045_FLASH - Flash interface
• 16Z034_GPIO - GPIO controller
• 16Z034_PWM - PWM Pulse Width Modulation
The FPGA offers the possibility to add customized I/O functionality.
Connector(s)Via front panel on a shielded 50-pin HP D-Sub SCSI 2 receptacle connector

General

ExpansionCompliant with PCI Specification 2.2
32-bit/33-MHz, 3.3V V(I/O)
Target
ElectricalIsolation voltage:
• 500 VAC
Supply voltage/power consumption:
• +5V (-3%/+5%), 240mA
• +3.3V (-5%/+5%), 15mA
MechanicalDimensions: conforming to IEEE 1386.1
Conformal CoatingConformal coating on request
SoftwareWindows®
Linux
VxWorks®
QNX®
TemperatureTemperature range (operation):
• -40..+85°C (qualified components)
• Airflow: min. 1.0m/s
Temperature range (storage): -40..+85°C
HumidityRelative humidity range (operation): max. 95% non-condensing
Relative humidity range (storage): max. 95% non-condensing
WeightWeight: 78g
Altitude-300m to + 3,000m
Vibration(sinusoidal): 1g/10..150Hz
ShockShock: 15g/11ms
Bump: 10g/16ms
MTBF957 834 h @ 40°C according to IEC/TR 62380 (RDF 2000)
Safety/CertificationPCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers
EMCConforming to EN 55022 (radio disturbance), IEC1000-4-2 (ESD) and IEC1000-4-4 (burst)
Warranty2 Years
RoHSCompliant

Ordering Details

Board15P506-00
Quad CAN bus interface, 4 CAN cores, front I/O, for convection cooled systems, -40..+85°C with qualified components
Accessories05P000-01
25 mounting screw sets to fix PMC/XMC modules on carrier boards