Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 
Advanet Inc

Advanet Adpmc7506

PowerPC PMC Processor Card - IBM Or Motorola CPU

Onboard 10/100 Ethernet, Upto 256MB ECC SDRAM & RS-232C Serial Port

 
Advanet Adpmc7506
 
  • IBM PPC750 300MHz or Motorola PPC7410 400MHz
  • 10/100Base-TX Ethernet
  • RS-232C Serial port
  • Up to 256MBytes SDRAM with ECC
  • Single size PMC module (including heat sink)



Datasheet/Manual:

Advanet Adpmc7506 datasheet in PDF format Datasheet in PDF format
Manual available on request Manual available on request

 

Introduction

The Adpmc7506 from Advanet is a PowerPC G3/G4 based PMC CPU Board. It features either the IBM PowerPC750 (running at 300MHz) or the Motorola PowerPC7410 (running at 400MHz). The board is available with either 128MB or 256MB of ECC SDRAM. Onboard there is a 10/100 Ethernet port along with a RS-232 serial port.

Adpmc7506block diagram
 
 

Specification
CPU:

IBM PowerPC750 300MHz or Motorola PowerPC7410 400MHz
L1 Cache 32kBytes for instruction, 32 kBytes for data
L1 Cache Clock 300MHz/400MHz
L2 Cache 1MByte/2MBytes, with parity
L2 Cache Clock 150MHz (max.)External Bus Frequency 100MHz
Memory:

Main memory: Up to 256MBytes SDRAM with ECC
Boot ROM 512KBytes Flash memory
256Bytes Serial EEPROM

Peripheral:

(Built-in GT-64260A)
One RS-232C Serial port
Ethernet 10/100Base-TX
Watch Dog Timer 2.55µsec. to 42.9 sec.
8-channel DMA Controller
Eight timers/counters (32 bit length)
PCI bus:

33.3MHz / 66.6MHz
Dimensions:

Single size PMC module (including heat sink)
Signaling level:

5.0V/3.3V TTL
Power requirements :

+5V, +3.3V
Operating Systems:

VxWorks
ROHS Status:

This product is currently not ROHS compliant.

Ordering Details:
Board:

Adpmc7506-G3-128 IBM PowerPC750 300MHz / SDRAM 128MB
Adpmc7506-G3-256 IBM PowerPC750 300MHz / SDRAM 256MB
Adpmc7506-G4-128 Motorola PowerPC7410 400MHz / SDRAM 128MB
Adpmc7506-G4-256 Motorola PowerPC7410 400MHz / SDRAM 256MB
Accessories:

N/A
Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2008 Diamond Point International. All rights reserved.