Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 
Aitech Defense Systems

Aitech M706

Avionic Communications PMC

2 MIL-STD-1553B, 16 ARINC-429 Rx, 8 ARINC-429 Tx, 12 Serial Channels & More!
 
Aitech M706
  
  • Single-Wide PMC module
  • 2 MIL-STD-1553B Dual Redundant Channels
  • 16 ARINC-429 Receive Channels
  • 8 ARINC-429 Transmit Channels
  • 12 Serial Channels (RS-232/422/485)
  • 6 GND/OPEN Opto-isolatedInputs/Outputs
  • 2 GND/OPEN Opto-isolated Inputs
  • 2 28V/OPEN Opto-isolated Outputs
  • 2 Opto-Isolated CANbus 2.0B Interface
  • 32-bit @ 66 MHz PCI operation
  • Front or Rear I/O
  • Drivers for VxWorks, Windows, Linux
  • Military/Space Level Ruggedization
  • Conduction and Air Cooled Versions
  • Vibration and Shock Resistant



Datasheet/Manual:

Aitech M706 datasheet in PDF format Aitech M706 datasheet - PDF
Manual available on request Manual available on request

 

Introduction

The M706 Avionic Communications PMC provides multiple avionics style communication protocols (MIL-STD-1553, ARINC-429, CANbus, and Serial I/O), all packed into a small single-width PMC form factor specifically designed for harsh environments. It offers a complete and unique solution for applications requiring diverse multiple avionics communication ports, eliminating the need for multiple cards and providing high flexibility for system integrators. The M706 integrates 2 dual redundant MIL-STD- 1553 channels, 16 ARINC-429 receive channels, 8 ARINC-429 transmit channels, 2 CANbus, and up to 12 UART ports.

MIL-STD-1553B ports support BC/RT/MT operation modes, Serial ports support RS-422/RS-232/RS-485 physical layer. 6 of the 12 serial ports can be configured to provide modem hardware flow control (flow control signals support RS-232 only).

The M706 also features 6 opto-isolated digital discrete input/output channels, which may be used to externally assign a unique RT address to one of the MIL-STD-1553B ports. In additional the M706 provides two special ground/open inputs and two 28V/open outputs.

M706 I/O signals can be routed to either the P4 or front panel connectors, according to the configuration.

For more details, refer to datasheet.

 
 

Specification

Features:
  • Single-Wide PMC
  • 2 MIL-STD-1553B Dual Redundant Channels
    • Full Support for BC/RT/MT Operation Modes
    • 64k x 16 Shared DPRAM per Channel
  • ARINC-429 Channels
    • 16 ARINC-429 Receive Channels
    • 8 ARINC-429 Transmit Channels
    • High/Low-Speed Support
  • 12 Serial Channels
    • Complete UART Operation
    • Support for RS-232/422/485 Physical Interface
    • 6 Channels are Configurable for Modem Hardware Flow Control (RS-232 only)
  • Opto-isolated Discrete I/O Channels
    • 6 GND/OPEN Inputs/Outputs
    • 2 GND/OPEN Inputs
    • 2 28V/OPEN Outputs
  • 2 Opto-Isolated CANbus 2.0B Interface
  • 32-bit @ 66 MHz PCI operation, compliant with PCI 2.2 Specification
  • IEEE P1386 (Air-Cooled) or VITA 20-2001 (Conduction-Cooled)
  • Front/Rear I/O
  • Hardware BIT Capabilities
  • Drivers for
    • Windows™ Embedded
    • Windows™ XP Professional
    • Linux®
    • VxWorks®
    • INTEGRITY®
  • Military Level Ruggedization
  • Vibration and Shock Resistant

ROHS Status:

This product's status is to be confirmed


Ordering Details:

Board:

Call for details

Accessories:

Call for details

Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2012 Diamond Point International. All rights reserved.