Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 
Aitech Defense Systems

Aitech M410

Servo I/O PMC Board

2-Synchro/Resolver to Digital Converters
 
Aitech M410
  
  • 2-Synchro/Resolver to Digital Converters
  • Selectable Resolution
  • A/D Converter, D/A Converter
  • PCI 2.1 Interface Compliant
  • VxWorks Real Time OS Support
  • Conduction and Air Cooled Versions
  • Vibration and Shock Resistant



Datasheet/Manual:

Aitech M410 datasheet in PDF format Datasheet in PDF format
Manual available on request Manual available on request

 

Introduction

The M410 Servo I/O PMC board is designed to provide three-wire Synchro-to-Digital (or four wire Resolver-to-Digital) conversion at 14-bit resolution (minimum) on a cost effective and small industrial PMC form factor. An on-board, synthesized AC-voltage source and frequency generator provide built-in-test (BIT) capability for the Synchro-to-Digital (S/D) converters.

To complement the S/D converters, general-purpose digital and analog I/O are also designed to provide a PMC solution that is suitable for a configurable servo-control-loop application.

All I/O can be sampled and stored in on-board, memory-mapped SRAM for further inspection and processing by the host processor. All I/O is BIT capable.

Implemented in an Actel FPGA, the M410 supports a high performance PCI interface that is fully compliant with PCI specification, revision 2.1.

For more details, refer to datasheet.

 
 

Specification
Features:
  • 2-Synchro/Resolver to Digital Converters - Selectable Resolution at 10, 12, 14 or 16 bit
    - Interface for Either 3-wire Synchro or 4-wire Resolver
    - 11.8Vrms Input Voltage
    - Input Frequencies of 400Hz to 3kHz
    - AC Voltage Source/Frequency Reference Software Configurable for Frequencies of 400Hz or 1200Hz
  • A/D Converter - 16-bit A/D Conversions at 100 kSPS
    - I8 Single-Ended or 4 Differential Software Selectable Analog Inputs
    - ± 10V Analog Input Range
    - 2 AC Input Interfaces
  • D/A Converter - 12-bit resolution
    - 4 Analog Outputs: 2 Voltage Mode, 2 Configurable as ± 10 Analog Voltage Mode or 0 to 20 mA Current Mode
  • Multiple Discrete Interfaces - 16 TTL or 8 Differential I/O
    - 4 General Purpose, TTL I/O
    - 4 Low-side Solenoid Drivers
    - 2 High-side Drivers
  • PCI 2.1 Interface Compliant, 32 bit @ 33 MHz PCI Bus Interface
  • Air-Cooled Version Compliant with IEEE 1386-2001 Specification
  • Conduction-Cooled Version Compliant with ANSI/VITA20-2001
  • Three Ruggedization Levels
  • VxWorks® Drivers
  • BIT (Built-in-Test) Available for complete Functional Testability
ROHS Status:

This product's status is to be confirmed


Ordering Details:
Board:

Call for details

Accessories:

Call for details

Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2008 Diamond Point International. All rights reserved.