Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 
MEN Mikro

MEN Mikro P517

Graphics Accelerator PMC

Silicon Motion SM731 Controller, 16MB RAM, up to 1600 x 1200 pixels
 
MEN P517 Graphics Accelerator PMC
  
  • Graphics controller SM731
  • 16 MB integrated graphics RAM
  • 4 Mbit video BIOS ROM
  • Up to 1600 x 1200 pixels
  • Up to 16.7 M colors
  • Up to 85 Hz refresh rate
  • LCD (up to UXGA) and CRT via DVI-I (front)
  • PanelLink via DVI-I (front)
  • S-Video I/O and Composite Video out via D-Sub (front)
  • 2x LVDS via on-board connector
  • Not ROHS compliant



Datasheet/Manual:

MEN P517 datasheet in PDF format MEN Mikro P517 Datasheet - PDF
Manual available on request Manual available on request

 

Introduction

The P517 is a high-performance graphics controller suitable for any PMC compliant host carrier board in any type of bus system, i.e. CPCI, VME or on any type of stand-alone SBC. A similar functionality is also available on PC-MIP®, a PCI-based mezzanine card in a smaller form factor. Appropriate PMC and PC-MIP® carrier cards in 3U, 6U and other formats are available from MEN or other manufacturers.

The P517 features the Silicon Motion SM731 3D/2D dual display controller which manages graphics processing. The SM731 supports a 235-MHz, 24-bit RAMDAC at a maximum of 1600 x 1200 pixels resolution and delivers enhanced multi-display capabilities. It can drive two independent digital displays (dual digital), either with identical or with different screen displays. Simultaneously, it can drive LCD, CRT and TV displays (DualMon). The controller also incorporates two 112-MHz max pixel clock LVDS channels that can drive two separate panels or a single high-resolution panel (UXGA).

The P517 provides a Digital Video Interface (DVI-I) for LCD and CRT via a DVI-I front-panel connector. It also provides an S-Video input and output and Composite Video output via a D-Sub front-panel connector. Both LVDS channels are supported via an onboard plug connector (optionally via the P4 rear I/O connector). These connections can be used to control a panel.
 
 

Specification

Graphics Control:

SM731 controller
Video

  • Zoom video port
  • Video filtering
  • Multiple independent hardware video windows

Memory

  • 16MB embedded SGRAM
  • 64-bit memory interface
  • Various on-chip DRAM memory configurations

DVI via PanelLink transmitter

  • Integrated Dual Channel LVDS transmitters
  • Single or dual pixel per clock
  • DualMon support
  • Up to 1600 x 1200 resolution
  • Up to 16.7M colors

RAMDAC

  • 235MHz
  • 24 bits
  • Up to 1600 x 1200 resolution
  • Up to 16.7M colors

Video BIOS ROM

  • 4 Megabit (512K x 8 bits)

Interfaces:

DVI-I via front-panel connector
S-Video Output/Input and Composite Video Output via front-panel connector
LVDS1 and LVDS2 via onboard connectors

PCI Characteristics:

32-bit PCI, complying with PCI Local Bus Specification, Rev. 2.2
33MHz
Target

Peripheral Connection:

Via front panel on one DVI-I connector and one standard 9-pin D-Sub receptacle connector
Via optional onboard 50-pin plug connector
Option: Via Pn4 rear I/O

Electrical:

Isolation voltage: tbd.
Supply voltage/power consumption:

  • +5V (4.85V..5.25V), 900mA max.
  • +3.3V (3.0V..3.6V), 1.4A typ.

MTBF: tbd. @ 50°C (derived from MIL-HDBK-217F)

Mechanical:

Dimensions: conforming to IEEE 1386.1
Weight: 84g

Environmental:

Temperature range (operation):

  • 0 to +60°C
  • Industrial temperature range on request
  • Airflow: min. 10m³/h

Temperature range (storage): -40 to +85°C
Relative humidity (operation): max. 95% non-condensing
Relative humidity (storage): max. 95% non-condensing
Altitude: -300m to + 3,000m
Shock: 15g/11ms
Bump: 10g/16ms
Vibration (sinusoidal): 2g/10..150Hz
Conformal coating on request

Safety:

PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers

Software Support:

Driver support for Windows® 2000/XP, OS-9® (incl. C library and shared library module for XiBase9)

EMC:

Tested according to EN 55022 (radio disturbance), IEC1000-4-2 (ESD) and IEC1000-4-4 (burst)

ROHS Status:

This product is not lead free/ROHS compliant.

Ordering Details:
Board:

15P517-00 Graphics accelerator, 16MB integrated SGRAM, 4 Mbit Flash BIOS, S-Video In/Out and Composite Video Output, 0..+60°C, no RoHS
Accessories:

05F007-02 DVI-to-VGA cable, DVI plug to 15-pin HD-Sub plug, 2m, -20..+70°C
05F007-03 Adapter, DVI analog plug to VGA 15-pin HD-Sub receptacle, -20..+70°C
05P017-00 Splitter cable D-Sub S-Video In/Out, Composite Video Output to 2 mini DIN 4-pin/RCA jacks
Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2012 Diamond Point International. All rights reserved.