Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 
MEN Mikro

MEN Mikro P601

Quad Redundant Gigabit Ethernet XMC

Four 10/100/1000Base-T channels, 4 RJ45 connectors at front
 
P601 Quad Gigabit Ethernet XMC mezzanine card
  
  • Four 10/100/1000Base-T channels
  • 1 XMC connector with 2 x4 PCIe® links
  • Alternatively two redundant channel pairs
  • 4 RJ45 connectors at front
  • Full and half duplex
  • 1.5 kV electrical isolation
  • ROHS compliant



Datasheet/Manual:

MEN P601 datasheet in PDF format MEN Mikro P601 Datasheet - PDF
Manual available on request Manual available on request

 

Introduction

The P601 is a Gigabit Ethernet XMC mezzanine card suitable for any XMC compliant single-board computer or host carrier board in any type of bus system, i.e. CPCI, VME or on any type of stand-alone SBC. Compared to PMC, the XMC standard defines a different board to board connector for support of PCI Express®. The four Ethernet channels on the P601 are provided by two Ethernet controllers with two lines each and supported by two PCIe® links with four lanes each. With a specific set-up the two lines inside each Ethernet controller can be used as a redundant channel pair. In this mode one line is monitored by the other line and the controller recognizes when an error occurs.

The P601 is typically suited as an extension for Windows® and Linux based systems with a heavy demand for multiple and ultra-fast communication requirements. As such it is used in high-bandwidth multi-channel communication applications in networked appliances such as base stations, routers, switches, gateways, residential gateway controllers, etc. Main target markets comprise telecom, medical engineering and transportation. For use in rugged environments the P601 is delivered with a passive heat sink and is prepared for conformal coating.

Equipped with Intel® components that come exclusively from the Intel® Embedded Line, the P601 has a guaranteed minimum standard availability of 5 years.
 
 

Specification

Ethernet:

Four 10/100/1000Base-T Ethernet channels at front panel
RJ45 connectors at front panel
Two independent dual-port Ethernet controllers

  • Fully integrated Gigabit Ethernet Media Access Controllers (MAC) and physical layer ports (PHY)
  • 48kB per port on-chip packet buffer
  • Full duplex and half duplex operation

Ethernet controllers are connected by two PCIe® links with four lanes each
Two LEDs per channel to signal LAN Link, Activity status and connection speed (10/100/1000Base-T)

XMC Characteristics:

XMC connector P15 assembled
Two links with four lanes each to connect local 1000Base-T Ethernet controllers (1GB/s per channel in each direction)
Both links on XMC connector P15

Peripheral Connections:

Via front panel on four RJ45 connectors

Electrical:

Isolation voltage: 1.5kV DC electrical isolation between isolated side and digital side
Supply voltage/power consumption:

  • +5V or +12V (-5%/+5%), 1.4A typ. (+5V), 600mA typ. (+12V)
  • +3.3V (-5%/+5%), 100mA typ

Mechanical:

Dimensions: conforming to XMC standard VITA 42.0-200x
Weight: 104 g (with heat sink)

Environmental:

Temperature range (operation):

  • 0 to +55°C
  • Airflow: min. 10m³/h

Temperature range (storage): -40 to +85°C
Relative humidity (operation): max. 95% non-condensing
Relative humidity (storage): max. 95% non-condensing
Altitude: -300m to + 3,000m
Shock: 15g/11ms
Bump: 10g/16ms
Vibration (sinusoidal): 2g/10..150Hz
Conformal coating on request

MTBF:

920,841h @ 40°C according to IEC/TR 62380 (RDF 2000)

Safety:

PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers

Software Support:

Drivers from Intel® for Windows® and Linux

EMC:

Tested according to EN 55022 (radio disturbance), IEC1000-4-2 (ESD) and IEC1000-4-4 (burst)

ROHS Status:

This product is lead free/ROHS compliant.

Ordering Details:
Board:

15P601-00 4-port 1000Base-T Ethernet, 4x RJ45, 2 x4 PCIe links, 5V supply, 0..+55°C
Accessories:

N/A
Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2012 Diamond Point International. All rights reserved.