Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 
MEN Mikro

MEN Mikro P507

Quad RS422/485 Interface PMC

Serial data rates up to 921,600 bits/s
 
MEN P507 Quad RS422/485 Interface
  
  • 32-bit/33-MHz PMC
  • 4 high-performance UARTs
  • Pattern generator
  • Full and half duplex, software programmable
  • Serial data rates up to 921,600 bits/s
  • Optical isolation between channels
  • -40 to +85°C with qualified components



Datasheet/Manual:

MEN P507 datasheet in PDF format MEN Mikro P507 Datasheet - PDF
Manual available on request Manual available on request

 

Introduction

The P507 is a high-performance quadruple UART with RS422/485 interface. It supports full duplex (with RS422) and half duplex operation (with RS485) and data rates of up to 921,600 bit/s. Each channel has its own 500V isolation, with all ports being available on the 50-pin D-Sub front connector. The P507 is based on the USM™ concept. USM™ Universal Submodules make PMC modules more flexible than ever. The UART interfaces are realized via four IP cores implemented inside its onboard FPGA. This function can be changed at any time through implementation of different IP cores. The corresponding line drivers are realized on the USM™ which is simply plugged on the P507. The module is suitable for any PMC compliant host carrier board in any type of bus system, i.e. CPCI, VME or on any type of stand-alone SBC in telecommunication, industrial, medical, transportation or aerospace applications. It offers long-term availability for at least 10 years and is qualified for operation in the extended temperature range.
 
 

Specification

UART Interfaces:

Four RS422/RS485 UARTs
Software-configurable
Data rates up to 921,600 bits/s
60-byte transmit/receive buffer
Full-duplex operation with RS422, half-duplex operation with RS485
Isolation between channels: 500V
Compatible with 16550 UART

Memory:

32MB SDRAM memory
- Soldered
- DDR2
- 132MHz memory bus frequency
- FPGA-controlled

2MB non-volatile Flash
- For FPGA data and Nios® firmware
- FPGA-controlled

FPGA:

Standard factory FPGA configuration:
- Main bus interface
- Interrupt controller, SMBus controller
- 16Z125_UART - UART Controller
- 16Z043_SDRAM - SDRAM controller
- 16Z045_FLASH - Flash interface
- 16Z034_GPIO - GPIO controller
The FPGA offers the possibility to add customized I/O functionality.

PMC:

Compliant with PCI Specification 2.2
32-bit/33-MHz, 3.3V V(I/O)
Target

Peripheral Connections:

Via front panel on a shielded 50-pin HP D-Sub SCSI 2 receptacle connector

Electrical:

Isolation voltage:
- 500 VAC

Supply voltage/power consumption:
- +5V (-3%/+5%), tbd
- +3.3V (-5%/+5%), tbd

Mechanical:

Dimensions: conforming to IEEE 1386.1
Weight: 78g

Environmental:

Temperature range (operation):
- -40..+85°C (qualified components)
- Airflow: min. 1.0m/s
Temperature range (storage): -40..+85°C
Relative humidity (operation): max. 95% non-condensing
Relative humidity (storage): max. 95% non-condensing
Altitude: -300m to + 3,000m
Shock: 15g/11ms
Bump: 10g/16ms
Vibration (sinusoidal): 1g/10..150Hz
Conformal coating on request

Safety:

PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers

EMC:

Tested according to EN 55022 Class A (radio disturbance), IEC1000-4-2 (ESD) and IEC1000-4-4 (burst)

Software Support:

Windows® and Linux

ROHS Status:

This product is lead free/ROHS compliant.

Ordering Details:
Board:

15P507-00 P507 - Quad RS422/485 Interface PMC
Accessories:

N/A
Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2012 Diamond Point International. All rights reserved.