Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 
MEN Mikro

MEN Mikro P511

Dual Fast Ethernet PMC

2 Full-Duplex Or Half-Duplex Channels, 6 Additional GPIOs
 
MEN P511 Dual Fast Ethernet PMC
  
  • Intel® Core™ 2 Duo T7400 or L7400
  • 2 full-duplex or half-duplex channels
  • 10Base-T and 100Base-TX physical layer
  • MAC layer realized in FPGA
  • Local or external data buffer
  • 6 additional GPIOs
  • Fully integrated to comply with IEEE802.3
  • 1500 VAC isolation voltage
  • -40 to +85°C with qualified components
  • 32-bit/33-MHz PMC
  • PMC based on USM™ concept
  • Individual FPGA configuration
  • ROHS compliant



Datasheet/Manual:

MEN P511 datasheet in PDF format MEN Mikro P511 Datasheet - PDF
Manual available on request Manual available on request

 

Introduction

The P511 is a 32bit/33MHz PMC with dual Ethernet functionality. The two channels can be accessed via two RJ45 connectors which are led to the front via an adapter cable from a SCSI connector. They support half duplex and full duplex operation.

The PMC offers the possibility to buffer all receive and transmit Ethernet frames either in a local or in an external data buffer. This makes it possible to provide a Worst Case Execution Time analysis which makes it particularly well suited for safety-critical applications.

Up to 6 GPIO lines can be used on the module for additional functionality.

The P511 is based on the USM™ concept. USM™ Universal Submodules make PMC modules more flexible than ever. The Ethernet functionality is realized via an IP core implemented inside its onboard FPGA. This function can be changed at any time through implementation of different IP cores. The corresponding line drivers are realized on the USM™ which is simply plugged on the P511. One alternative function is the combination of an Ethernet core with a fieldbus interface to build gateways.

The module is suitable for any PMC compliant host carrier board in any type of bus system, i.e. CPCI, VME or on any type of stand-alone SBC in telecommunication, industrial, medical, transportation or aerospace applications. It offers long-term availability for at least 10 years and is qualified for operation in the extended temperature range.
 
 

Specification

Ethernet:

Two 10/100Base-T Ethernet channels
Accessible on two RJ45 connectors via adapter cable
Half duplex/full duplex support

Memory:

32MB SDRAM memory
o Soldered
o DDR2
o 132MHz memory bus frequency
o FPGA-controlled

2MB non-volatile Flash
o For FPGA data and Nios® firmware
o FPGA-controlled

GPIO:

Up to six GPIO lines
Controlled via software

FPGA:

Standard factory FPGA configuration:
o Main bus interface
o Interrupt controller, SMBus controller
o 16Z087_ETH - Ethernet MAC IP core (2 IP cores for the 2 channels)
o 16Z043_SDRAM - SDRAM controller
o 16Z045_FLASH - Flash interface
o 16Z034_GPIO - GPIO controllers (2 IP cores, for onboard LEDs and 8-bit I/O)
The FPGA offers the possibility to add customized I/O functionality.

PMC:

Compliant with PCI Specification 2.2
32-bit/33-MHz, 3.3V V(I/O)
Target and initiator

Peripheral Connections:

Via front panel on a shielded 50-pin HP D-Sub SCSI 2 receptacle connector
Adapter cable to two RJ45 connectors included in the delivery

Electrical:

Isolation voltage:
o 1500 VAC
Supply voltage/power consumption:
o +5V (-3%/+5%), tbd
o +3.3V (-5%/+5%), tbd

Mechanical Specifications:

Dimensions: conforming to IEEE 1386.1
Weight: tbd

Environmental:

Temperature range (operation):
o -40..+85°C (qualified components)
o Airflow: min. 1.0m/s
Temperature range (storage): -40..+85°C
Relative humidity (operation): max. 95% non-condensing
Relative humidity (storage): max. 95% non-condensing
Altitude: -300m to + 3,000m
Shock: 15g/11ms
Bump: 10g/16ms
Vibration (sinusoidal): 1g/10..150Hz
Conformal coating on request

MTBF:

tbd @ 40°C according to IEC/TR 62380 (RDF 2000)

Safety:

PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers

Software Support:

Windows® and Linux

EMC:

Conforming to EN 55022 (radio disturbance), IEC1000-4-2 (ESD) and IEC1000-4-4 (burst)

ROHS Status:

This product is lead free/ROHS compliant.

Ordering Details:
Board:

15P511-00 Dual Fast Ethernet, 2 Ethernet cores, 6 GPIO signals, front I/O, for convection cooled systems, -40..+85°C with qualified components

Accessories:

N/A
Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2012 Diamond Point International. All rights reserved.