Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 
Men Mikro

Men Mikro P602

Quad Redundant Gigabit Ethernet XMC

Four 10/100/1000Base-T Channels, Intel Controller
 
MEN P602 Quad Redundant Gigabit Ethernet XMC
  
  • Intel® Core™ 2 Duo T7400 or L7400
  • Four 10/100/1000Base-T channels
  • 2 XMC connectors with 1x 4 PCIe® link on each connector
  • Alternatively two redundant channel pairs
  • 4 RJ45 connectors at front
  • Full and half duplex
  • 1.5 kV electrical isolation



Datasheet/Manual:

MEN D9 datasheet in PDF format Datasheet in PDF format
Manual available on request Manual available on request

 

Introduction

P602 is a Gigabit Ethernet XMC mezzanine card suitable for any XMC compliant single-board computer or host carrier board in any type of bus system, i.e. CPCI, PXI™, VME or on any type of stand-alone SBC. Compared to PMC, the XMC standard defines a different board-to-board connector for support of PCI Express®. The four Ethernet channels on the P602 are provided by two Ethernet controllers with two lines each. Each of the two XMC connectors supports one link with up to four lanes. With a specific set-up the two lines inside each Ethernet controller can be used as a redundant channel pair. In this mode one line is monitored by the other line and the controller recognizes when an error occurs.

The P602 is typically suited as an extension for Windows® and Linux based systems with a heavy demand for multiple and ultra-fast communication requirements. As such it is used in high-bandwidth multi-channel communication applications in networked appliances such as base stations, routers, switches, gateways, residential gateway controllers, etc. Main target markets comprise telecom, medical engineering and transportation.

For use in rugged environments the P602 is delivered with a passive heat sink and is prepared for conformal coating. Equipped with Intel® components that come exclusively from the Intel® Embedded Line, the P602 has a guaranteed minimum standard availability of 5 years.
 
 

Specification
Ethernet:

Four 10/100/1000Base-T Ethernet channels at front panel
RJ45 connectors at front panel
Two independent dual-port Ethernet controllers

  • Fully integrated Gigabit Ethernet Media Access Controllers (MAC) and physical layer ports (PHY)
  • 48kB per port on-chip packet buffer
  • Full duplex and half duplex operation

Ethernet controllers are connected by two PCIe® links with four lanes each
Two LEDs per channel to signal LAN Link, Activity status and connection speed (10/100/1000Base-T)
XMC:

Compliant with XMC standard VITA 42.3-200x
XMC connectors P15 and P16 assembled
Peripheral Connections:

Via front panel on four RJ45 connectors
PCI Express®:

Two links with four lanes each to connect local 1000Base-T Ethernet controllers (1GB/s per channel in each direction)
One link with four lanes on XMC connector P15 and one on P16
Electrical:

Isolation voltage: 1.5kV DC electrical isolation between isolated side and digital side
Supply voltage/power consumption:

  • +5V or +12V (-5%/+5%), 1.4A typ. (+5V), 600mA typ. (+12V)
  • +3.3V (-5%/+5%), 100mA typ.

MTBF: 920,841h @ 40°C according to IEC/TR 62380 (RDF 2000)
Mechanical:

Dimensions: conforming to XMC standard VITA 42.0-200x
Weight: 106 g (with heat sink)
Environmental:

Temperature range (operation):
0..+55°C
Industrial temperature range on request
Airflow: min. 10m³/h
Temperature range (storage): -40..+85°C
Relative humidity (operation): max. 95% non-condensing
Relative humidity (storage): max. 95% non-condensing
Altitude: -300m to + 2,000m
Shock: 15g/11ms
Bump: 10g/16ms
Vibration (sinusoidal): 2g/ 10..150Hz
Conformal coating on request
Safety:

PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers
EMC:

Tested according to EN 55022 Class A (radio disturbance), IEC1000-4-2 (ESD) and IEC1000-4-4 (burst)
Software Support:

Drivers from Intel® for Windows® and Linux
ROHS Status:

This product is lead free/ROHS compliant.

Ordering Details:
Board:

15P602-00 2 XMC connectors, 1x4 PCIe link on each XMC connector, 0..+55°C
Accessories:

13T001-70 Windows® network driver (Intel®) for F14, F15, F17, F18, D9, D6, D7, D601, A19, A20 and P601, P602
Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2008 Diamond Point International. All rights reserved.