Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 
MEN Mikro

MEN Mikro P506

Quad CAN Bus Interface PMC Board

CAN Protocol Version 2.0A/B, Up to 1 Mbit/s data transfer rate
 
MEN Mikro P506 - Quad CAN Bus Interface PMC
  
  • 32-bit/33-MHz PMC
  • Full CAN/Extended CAN
  • 4 independent channels
  • ISO high-speed coupling
  • Up to 1 Mbit/s data transfer rate
  • CANopen master and slave support
  • CAN Layer 2 support
  • Isolation between channels
  • Compliant to ISO 11898-1 and ISO 11898-2
  • -40 to +85°C with qualified components
  • ROHS compliant



Datasheet/Manual:

MEN P506 datasheet in PDF format Datasheet in PDF format
Manual available on request Manual available on request

 

Introduction

The P506 is a 32-bit/33MHz PMC with four CAN interfaces. They support CAN Protocol Version 2.0A/B, standard and extended data frames, remote frames, 0..8 bytes data length and a programmable data rate of up to 1 Mbit/s.

The P506 is based on the USM™ concept. USM™ Universal Submodules make PMC modules more flexible than ever. The CAN bus interfaces are realized via four IP cores implemented inside its onboard FPGA. This function can be changed at any time through implementation of different IP cores. The corresponding line drivers are realized on the USM™ which is simply plugged on the P506. The module is suitable for any PMC compliant host carrier board in any type of bus system, i.e. CPCI, VME or on any type of stand-alone SBC in telecommunication, industrial, medical, transportation or aerospace applications. It offers long-term availability for at least 10 years and is qualified for operation in the extended temperature range.
 
 

Specification

CAN Interface:

Compliant to ISO 11898-1 and ISO 11898-2
Four channels
CAN Protocol Version 2.0A/B
- Standard and extended data frames
- 0..8 bytes data length
- Programmable data rate up to 1 Mbit/s
Support for remote frames
5 receive buffers (FIFO-scheme)
3 transmit buffers with prioritization
Maskable identifier filter
Programmable loop-back mode for self-test operation
Signaling and interrupt capabilities for receiver and transmitter error states

Memory:

32MB SDRAM memory
- Soldered
- DDR2
- 132MHz memory bus frequency
- FPGA-controlled

2MB non-volatile Flash
- For FPGA data and Nios® firmware
- FPGA-controlled

FPGA:

Standard factory FPGA configuration:
- Main bus interface
- Interrupt controller, SMBus controller
- 16Z029_CAN - CAN Controller
- 16Z043_SDRAM - SDRAM controller
- 16Z045_FLASH - Flash interface
- 16Z034_GPIO - GPIO controller
- 16Z034_PWM - PWM Pulse Width Modulation
The FPGA offers the possibility to add customized I/O functionality.

PMC:

Compliant with PCI Specification 2.2
32-bit/33-MHz, 3.3V V(I/O) Target

Peripheral Connections:

Via front panel on a shielded 50-pin HP D-Sub SCSI 2 receptacle connector

Electrical:

Isolation voltage:
- 1500 VAC
Supply voltage/power consumption:
- +5V (-3%/+5%), tbd
- +3.3V (-5%/+5%), tbd

Mechanical:

Dimensions: conforming to IEEE 1386.1
Weight: 78g

Environmental:

Temperature range (operation):
- -40..+85°C (qualified components)
- Airflow: min. 1.0m/s
Temperature range (storage): -40..+85°C
Relative humidity (operation): max. 95% non-condensing
Relative humidity (storage): max. 95% non-condensing
Altitude: -300m to + 3,000m
Shock: 15g/11ms
Bump: 10g/16ms
Vibration (sinusoidal): 1g/10..150Hz
Conformal coating on request

MTBF:

tbd @ 40°C according to IEC/TR 62380 (RDF 2000)

Safety:

PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers

Software Support:

Windows® (in preparation)
Linux (in preparation)

EMC:

Conforming to EN 55022 (radio disturbance), IEC1000-4-2 (ESD) and IEC1000-4-4 (burst)

ROHS Status:

This product is lead free/ROHS compliant.

Ordering Details:
Board:

15P506-00 P506 Quad CAN Bus Interface PMC
Accessories:

N/A
Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2009 Diamond Point International. All rights reserved.