Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

Congatec QEVAL/Qseven 2.0 Carrier - for Evaluating SMARC Modules

Broad Range of Interface Options for Design Development Flexibility

Introduction

QEVAL 2.0 evaluation carrier board is designed according to Qseven® specification 2.0 and supports both x86 and ARM modules. With this dual architecture support, customers can test modules with different architectures on a single carrier board, thereby reducing production cost and time.

Specification

CPU

Graphics1x Dual Channel LVDS, HDMI or Display Port
Backlight control
Network1x GB LAN
Storage2x SATA
USBUp to 8x USB 2.0, up to 2x USB 3.0, USB Client,
SerialSerial ports – RS232
Audio5.1 Audio, Microphone, Line In, potical S/PDIF Out
OtherLPC POST code display, System speaker
Power button, Reset button, LID button, Sleep button
External BIOS flash
LPC header, SPI header, 3pin or 4pin FAN
I²C EEPROM, Aux. signals for battery management

General

Expansion4x PCIe x1 / 3x PCIe x1 and mini PCIe, 1x SDIO Card Socket
Electrical12 V single power input, ATX power input connector, CMOS battery
Mechanical293.4 x 171.5 mm
TemperatureOperation: 0 to +60°C
Storage: -20 to +80°C
HumidityOperating: 10 to 90%
Storage 5 to 95%
Warranty2 Years
RoHSCompliant

Ordering Details

Board007003
conga-QEVAL/Qseven 2.0 x86
Evaluation carrier board for Qseven 2.0 modules based on x86 architecture.

007005007003
conga-QEVAL/Qseven 2.0 ARM
Evaluation carrier board for Qseven 2.0 modules based on ARM architecture.
Accessories077455
conga-QKIT
Qseven-Starterkit with Qseven Evaluation Carrier Board, Power Supply Unit, Flat Panel Adapter, SDVO-ADD2 Card, SATA-to-CF Adapter, LVDS-to-DVI Adapter, SATA-to-IDE 2 Adapter, Cable-Box, USB-Stick

Need storage - try Innodisk SSD