Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

B&B Vlinx VESR900 Series - 1 and 2 port Ethernet to Serial Converters

RS-422/485, RS-232/422/485 and RS-232 to Ethernet

Introduction

Solve most any Serial to Ethernet conversion challenge with 1 port and 2 port VESR Ethernet to Serial Device Servers

  • UL Class 1 Div 2
  • Fiber Ethernet and built-in Ethernet pass-through options available
  • Connect RS-232, RS-422, or RS-485 Serial Devices to your LAN or WAN
  • Direct IP - IP applications communicate directly with Serial Devices
  • Virtual COM Port - PC's communicate with Serial Devices as if they were connected to a local COM port
  • Paired Mode or Serial Tunneling - Serial devices exchange data using your Ethernet network

Specification

Function

InterfaceRS-232 (DB9): TD, RD, DTR, DSR, RTS, CTS, DCD plus Signal Ground
RS-485: 2-Wire Data A(-), Data B(+), GND
RS-422/485 4-Wire: TDA(-), TDB(+), RDA(-), RDB(+), GND
Data RatesUp to 230.4 Kbps
OtherLED Indicators: Ready, Power, Serial Data, Ethernet Speed, Ethernet Link
Switches: Reset Button

NETWORK
• Serial Memory: 8 KB per port
• Network Memory: 4 KB
• LAN: 10/100 Mbps Auto-detecting, 10BaseT or 100BaseTX
• Ethernet: IEEE 802.3 auto detecting & auto MDI/MDI-X, 10BaseT and 100Base T
• Protocols: TCP, IPv4, UDP, ARP, HTTP 1.0, ICMP/PING, DHCP/BOOTP
• IP Mode: Static, DHCP
• TCP/UDP: User Definable
• UDP: Unicast or Multicast
• Connection Mode: Server, Client, VCOM, Paired
• Client Connection: At power up or upon data arrival
• Search: Serial direct COM and Ethernet Auto Search or specific IP
• Diagnostics: Display PC IP, ping, test VCOM
• Firmware Upgrade: Vlinx Manager

ETHERNET PASS-THROUGH PORT
• Standards: IEEE 802.3, 802.3u, 802.3x
• Processing Type: Store and Forward with 802.3x full duplex, non blocking flow control
• Flow Control: IEEE 802.3x flow control, back pressure flow control
• MAC Address Table: 2K
Connector(s)Serial: DB9M or Removable Terminal Blocks
Power: Removable Terminal Block (12 – 28 AWG)

General

ElectricalInput Voltage: 10 to 48 VDC (58 VDC Maximum)
Power Consumption: VESR90x: 4.0 Watts Max, VESR92x: 6.0 Watts Max
MechanicalVESR90x: 11.94 x 8.03 x 2.96 cm (4.70 x 3.16 x 1.16 in)
VESR92x: 14.86 x 10.11 x 2.96 cm (5.85 x 3.98 x 1.16 in)
Enclosure: 35mm DIN mount, Plastic, IP 30
SoftwareVlinx Manager: Windows XP (32/64 bit), 2003 Server (32/64 bit), Vista (32/64 bit), 2008 Server (32/64 bit), Windows 7 (32/64 bit)
TemperatureTemperature range (operation): -40 to +80°C
Humidity10 to 95% Non-condensing
WeightVESR90x: 149.7 g (0.33 lbs)
VESR92x: 204.1 g (0.45 lbs)
MTBFVESR90x: ~ 132309 hours
VESR92x: ~ 102593 hours
Safety/CertificationFCC, CE, NEMA TS2 (VESR901)
UL Listed, File E222870
UL Class 1 Division 2 Groups A, B, C, D
(HAZLOC) File E245458
WarrantyLifetime
RoHSCompliant

Ordering Details

BoardVESR922T
Ethernet Serial Server, (2) Serial TB, (2) 10/100 Ethernet RJ45

VESR921-MC
Ethernet Serial Server, (1) Serial DB9 or TB, (1) 100BaseFX Multi-Mode SC, (1) 10/100 RJ45 Ethernet

VESR921-MT
Ethernet Serial Server, (1) Serial DB9 or TB, (1) 100BaseFX Multi-Mode ST, (1) 10/100 RJ45 Ethernet

VESR921-SC
Ethernet Serial Server, (1) Serial DB9 or TB, (1) 100BaseLX Single-Mode SC, (1) 10/100 RJ45 Ethernet

VESR922T-MT
Ethernet Serial Server, (2) Serial TB, (1) 100BaseFX Multi-Mode ST, (1) 10/100 RJ45 Ethernet

VESR922T-MC
Ethernet Serial Server, (2) Serial TB, (1) 100BaseFX Multi-Mode SC, (1) 10/100 RJ45 Ethernet

VESR922T-SC
Ethernet Serial Server, (2) Serial TB, (1) 100BaseLX Single-Mode SC, (1) 10/100 RJ45 Ethernet
AccessoriesTB5P508SR-2PK 5 position terminal block with strain relief paddle board, 2 pack