Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

congatec conga-SEVAL - SMARC 2.0 Evaluation Carrier Board

Broad Range of Interface Options for Design Development Flexibility

Introduction

To achieve a quick start with SMARC, congatec offers an evaluation carrier board, which routes all the SMARC signals to standard interface connectors.

I/O 

  • 1x PCIe x4 | 1x miniPCIe | 1x PCIe x1 | 1x M.2 socket Key E
  • 1x SATA
  • 1x USB 3.0 | 1x USB 2.0 | 1x micro USB 2.0 (OTG) | 1x USB Type C with PD and DP1 via Alternate Mode
  • 2x RS-232 (1x internal RX/TX on pinheader, 1x RX/TX w/ handshake on DSUB9)
  • 2x CAN
  • GPIO
  • 1x SDIO interface
  • 2x I²C Bus
  • 1x eSPI/SPI1 on header
  • 1x SPI Bus
  • 1x FAN control
  • 1x Disk Drive Power Output


Internal Graphic Interface 

  • 2x24 bit LVDS connector shared with 2x eDP or 2xDSI

 External Graphic Interfaces 

  • 1x DP++
  • 1x HDMI

Audio 

  • I2S Audio interface and HDA interface

Specification

CPU

GraphicsHDMI Interface
NetworkGB LAN
StorageSATA MO-300 interface
Expansion2x mini PCIe interface
1x PCIe interface
SDIO 4-bit interface to micro SD connector
USB7 port USB hub supporting multiple I/O options
SerialSerial ports – RS232
OtherIndustry and Kontron defi ned mezzanine interfaces
SIM Card interface for mobile application connectivity
CSI – Camera Serial Interface
Accelerometer
Can Bus interface

General

ElectricalLi-Ion battery support 3V-5.25V
Mechanical200 x 210 mm
Warranty2 Years
RoHSCompliant

Ordering Details

Board077650
conga-SKIT
Starterkit for SMARC 2.0 modules
Accessories51100-0000-00-S SMARC Starterkit for SMARC™ Computer-on-modules

Need storage - try Innodisk SSD