Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

Innodisk 2.5” SATA SSD 3MG5-P - 2.5” SATA MLC SSD

Up to 512GB Capacities, up to 560MB/s Read, up to 500MB/s Write

Introduction

3MG5-P is Innodisk’s first product series supported 3D NAND flash. Innodisk 2.5” SATA SSD 3MG5-P is characterized by L3 architecture and RAID engine with the latest SATA III (6.0GHz) ID204 controller. Innodisk’s exclusive L3 architecture is L2 architecture multiplied LDPC (Low Density Parity Check). L2 (Long Life) architecture is a 4K mapping algorithm that reduces WAF and features a real-time wear leveling algorithm to provide high performance and prolong lifespan. Innodisk 2.5” SATA SSD 3MG5-P is equipped RAID engine to offer additional level of data protection for exceptional reliability.

Specification

Storage Specification

Model Info2.5” SATA SSD 3MG5-P
Flash Type3D MLC
InterfaceSATA III 6.0 Gb/s
Connector Standard 7 (data) + 15 (power) SATA connector
Capacity128GB to 512GB
Channels4
PerformanceR/w: 560/500 MB/s
Thermal SensorYes
DRAM BufferYes
ATA SecurityYes
SMARTYes
Data SecurityNot supported
OtheriCell: Supported

General

Electrical6W (5V x 1.2A)
Mechanical69.85 x 100.10 x 6.9 mm
Conformal CoatingFactory option - contact us for details
TemperatureOperating: Standard Grade: 0C to +70C;
Storage: -55 to +95°C
Vibration20G@7~2000Hz
Shock1500G@0.5ms
MTBF>3 million hours
Warranty2 Years
RoHSCompliant

Ordering Details

Board2.5" SATA SSD 3MG5-P w& Micron 3D MLC (iCell, Industrial, Standard Grade, 0 to +70°:C)
DGS25-A28D21CCAQGP 128GB 2.5" SATA SSD 3MG5-P w/ iCell, 3D MLC flash, 4 channels, 560 MB/s (read), 500 MB/s (write)
DGS25-B56D21CCAQGP 256GB 2.5" SATA SSD 3MG5-P w/ iCell, 3D MLC flash, 4 channels, 560 MB/s (read), 520 MB/s (write)
DGS25-C12D21CCAQGP 512GB 2.5" SATA SSD 3MG5-P w/ iCell, 3D MLC flash, 4 channels, 560 MB/s (read), 500 MB/s (write)
AccessoriesN/A