Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

Innodisk 2.5” SATA SSD 3SE4 - 2.5” SATA SLC SSD

Up to 64GB Capacities, up to 370MB/s Read, up to 330MB/s Write

Introduction

Innodisk 2.5” SATA SSD 3SE4 is characterized by L3 architecture with the latest SATA III (6.0GHz) Marvell NAND controller. Innodisk’s exclusive L3 architecture is L2 architecture multiplied LDPC (Low-Density Parity Check). L2 (Long Life) architecture is a 4K mapping algorithm that reduces WAF and features a real-time wear levelling algorithm to provide high performance and prolong lifespan with exceptional reliability.

Specification

Storage Specification

Model Info2.5” SATA SSD 3SE4
Flash TypeSLC
ConnectorStandard 7 (data) + 15 (power) SATA connector
Capacity8GB to 64GB
Channels2
PerformanceSequential R/W (MB/sec, max.): 360 / 210
Thermal SensorYes
H/W Write ProtectNo
DRAM BufferNo
ATA SecurityYes
SMARTYes
Data SecurityNot supported

General

Electrical1.1 W (5V x 220 mA )
Mechanical69.85 x 100.10 x 6.9 mm
TemperatureOperating: Standard Grade: 0 to +70°C
Operating: Industrial Grade: -40 to +85°C
Storage: -55 to +95°C
Vibration20G@7~2000Hz
Shock1500G@0.5ms
MTBF>3 million hours
Warranty5 Years
RoHSCompliant

Ordering Details

Board2.5" SATA SSD 3SE4 (Industrial, Standard Grade, 0 to +70°C)
DES25-08GM41SCADB 08GB 2.5" SATA SSD 3SE3, SLC flash
DES25-16GM41SCADB 16GB 2.5" SATA SSD 3SE3, SLC flash
DES25-32GM41SCADB 32GB 2.5" SATA SSD 3SE3, SLC flash
DES25-64GM41SCADB 64GB 2.5" SATA SSD 3SE3, SLC flash

2.5" SATA SSD 3SE4 (Industrial, W&T Grade, -40 to 85°C
DES25-08GM41SWADB 08GB 2.5" SATA SSD 3SE3, SLC flash
DES25-16GM41SWADB 16GB 2.5" SATA SSD 3SE3, SLC flash
DES25-32GM41SWADB 32GB 2.5" SATA SSD 3SE3, SLC flash
DES25-64GM41SWADB 64GB 2.5" SATA SSD 3SE3, SLC flash
AccessoriesN/A