Call us: +44 (0)1634 300900 | E-mail:

Diamond Point International

Innodisk M.2 (S42) 3SE3 - Industrial M.2/NGFF SLC SSD

Up to 32GB Capacities, up to 210MB/s Read, up to 110MB/s Write


Innodisk M.2 (S42) 3SE3 is designed as the standard M.2 form factor with SATA interface and supports SATA III standard (6.0Gb/s) with excellent performance. The form factor refers to the M.2(NGFF) specification which established by JEDEC. Regarding of mechanical interference, Innodisk M.2 (S42) 3SE3 absolutely replaces the traditional hard disk and makes personal computer, in any field, smaller and easier.

Innodisk M.2 (S42) 3SE3 effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.


Storage Specification

Model InfoM.2 (S42) 3SE3
Flash TypeSLC
ConnectorStandard M.2 connection
Capacity4GB to 32GB
PerformanceSequential R/W (MB/sec, max.): 210 / 110
Thermal SensorST- Optional / WT- Default
H/W Write ProtectNo
DRAM BufferNo
ATA SecurityYes
Data SecurityNot supported


Electrical1.2 W (3.3V x 366 mA)
Mechanical22.0 x 42.0 x 3.5 mm
TemperatureOperating: Standard Grade: 0 to +70°C
Operating: Industrial Grade: -40 to +85°C
Storage: -55 to +95°C
Humidity10-95%, non-condensing
MTBF>3 million hours
Warranty5 Years

Ordering Details

BoardAvailable on request - please call for details