Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

Innodisk M.2 (S80) 3SE3 - Industrial M.2/NGFF SLC SSD

Up to 128GB Capacities, up to 380MB/s Read, up to 220MB/s Write

Introduction

Innodisk M.2 (S80) 3SE3 is designed as the standard M.2 form factor with SATA interface and supports SATA III standard (6.0Gb/s) with excellent performance. The form  factor refers to the M.2(NGFF) specification which established by JEDEC. Regarding of mechanical interference, Innodisk M.2 (S80) 3SE3 absolutely replaces the traditional hard disk and makes personal computers in any field, smaller and easier.

Innodisk M.2 (S80) 3SE3 effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required and can be configured as a boot device or data storage device

Specification

Storage Specification

Model InfoM.2 (S80) 3SE3
Flash TypeSLC
ConnectorStandard M.2 connection
Capacity8GB to 128GB
Channels4
PerformanceSequential R/W (MB/sec, max.): 380 / 220
Thermal SensorStandard temp: No
Extended temp: Yes
H/W Write ProtectFactory option
DRAM BufferNo
ATA SecurityYes
SMARTYes
Data SecurityNot supported

General

Electrical1.96 W (3.3V x 594 mA)
Mechanical22.0 x 80.0 x 3.5 mm
TemperatureOperating: Standard Grade: 0 to +70°C
Operating: Industrial Grade: -40 to +85°C
Storage: -55 to +95°C
Vibration20G@7~2000Hz
Shock1500G@0.5ms
MTBF>3 million hours
Warranty5 Years
RoHSCompliant

Ordering Details

BoardTo follow
AccessoriesN/A