Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

Innodisk SATADOM-MH 3IE - SATA Disk On Module iSLC SSD

Up to 64GB Capacities, up to 300MB/s Read, up to 190MB/s Write

Introduction

Innodisk SATADOM-MH 3IE is designed as the standard SATA 7 pin connector with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance. Innodisk SATADOM-MV 3IE absolutely replaces the traditional hard disk and makes personal computer, in any field, smaller and easier.

Innodisk SATADOM-MH 3IE effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.

Specification

Storage Specification

Model InfoSATADOM-MH 3IE
Horizontal mount
Flash TypeiSLC
ConnectorStandard 7 pin SATA
Pin 7 power option
Capacity8GB to 64GB
Channels4
PerformanceSequential R/W (MB/sec, max.): 300 / 190
Thermal SensorWide Temp. only
H/W Write ProtectNo
DRAM BufferNo
ATA SecurityYes
SMARTYes
Data SecurityNot supported

General

Electrical1.0W (5V x 200mA)

Power - choice of:
• Power applied via 7 pin technology (motherboard support required), part number ends in F
• External two pin power connector (cable included)
Mechanical40.0 mm x 30.0 mm x 9.0 mm
TemperatureOperating: Standard Grade: 0 to +70°C
Operating: Industrial Grade: -40 to +85°C
Storage: -55 to +95°C
Vibration20G@7~2000Hz
Shock1500G@0.5ms
MTBF>3 million hours
Warranty5 Years
RoHSCompliant

Ordering Details

BoardSATADOM-MH 3IE (Industrial, Standard Grade, 0 to 70°C)
DHSMH-08GD073C1DC 08GB SATADOM-MH 3IE, iSLC flash, 2 channels, 230 MB/s (read), 95 MB/s (write)
DHSMH-16GD073C1DC 16GB SATADOM-MH 3IE, iSLC flash, 2 channels, 300 MB/s (read), 190 MB/s (write)
DHSMH-32GD073C1DC 32GB SATADOM-MH 3IE, iSLC flash, 2 channels, 300 MB/s (read), 190 MB/s (write)
DHSMH-64GD073C1DC 64GB SATADOM-MH 3IE, iSLC flash, 2 channels, 300 MB/s (read), 190 MB/s (write)

SATADOM-MH 3IE with Pin7 VCC (Industrial, Standard Grade, 0 to 70°C)
DHSMH-08GD073C1DCF 08GB SATADOM-MH 3IE with Pin7 VCC, iSLC flash, 2 channels, 230 MB/s (read), 95 MB/s (write)
DHSMH-16GD073C1DCF 16GB SATADOM-MH 3IE with Pin7 VCC, iSLC flash, 2 channels, 300 MB/s (read), 190 MB/s (write)
DHSMH-32GD073C1DCF 32GB SATADOM-MH 3IE with Pin7 VCC, iSLC flash, 2 channels, 300 MB/s (read), 190 MB/s (write)
DHSMH-64GD073C1DCF 64GB SATADOM-MH 3IE with Pin7 VCC, iSLC flash, 2 channels, 300 MB/s (read), 190 MB/s (write)
AccessoriesN/A