Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

Innodisk SATADOM-MH 3SE - SATA Disk On Module SLC SSD

Up to 32GB Capacities, up to 260MB/s Read, up to 130MB/s Write

Introduction

Innodisk Serial ATA Disk on Module (SATADOM) supports SATA III standard (6.0Gb/s) interface with excellent performance, and SATADOM-MH 3SE is designed as the smallest form factor size that could enhance compatibility with various design applications. Particularly the 7th pin of standard SATA 7pin connector can optionally be the built-in power VCC pin.

Innodisk SATADOM-MH 3SE effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.

Specification

Storage Specification

Model InfoSATADOM-MH 3SE
Horizontal mount
Flash TypeSLC
ConnectorStandard 7 pin SATA
Capacity4GB to 32GB
Channels2
PerformanceSequential R/W (MB/sec, max.): 260 / 130
Thermal SensorWide Temp. only
H/W Write ProtectNo
ATA SecurityYes
SMARTYes
Data SecurityNot supported

General

Electrical1.8W (5V x 360mA)

Power - choice of:
• Power applied via 7 pin technology (motherboard support required), part number ends in F
• External two pin power connector (cable included)
Mechanical40.0 x 30.0 x 9.0 mm
TemperatureOperating: Standard Grade: 0C to +70C;
Operating: Industrial Grade: -40C to +85C
Storage: -55 to +95°C
Vibration20G@7~2000Hz
Shock1500G@0.5ms
MTBF>3 million hours
Warranty5 Years
RoHSCompliant

Ordering Details

BoardSATADOM-MH 3SE (Industrial, Standard Grade, 0 to 70°C)
DESMH-04GD07SCADB 04GB SATADOM-MH 3SE, SLC flash, 2 channels, 200 MB/s (read), 55 MB/s (write)
DESMH-08GD07SCADB 08GB SATADOM-MH 3SE, SLC flash, 2 channels, 210 MB/s (read), 65 MB/s (write)
DESMH-16GD07SCADB 16GB SATADOM-MH 3SE, SLC flash, 2 channels, 260 MB/s (read), 130 MB/s (write)
DESMH-32GD07SCADB 32GB SATADOM-MH 3SE, SLC flash, 2 channels, 260 MB/s (read), 130 MB/s (write)

SATADOM-MH 3SE with Pin7 VCC Supported (Industrial, Standard Grade, 0 to 70°C)
DESMH-04GD07SCADBF 04GB SATADOM-MH 3SE, SLC flash, 2 channels, 200 MB/s (read), 55 MB/s (write)
DESMH-08GD07SCADBF 08GB SATADOM-MH 3SE, SLC flash, 2 channels, 210 MB/s (read), 65 MB/s (write)
DESMH-16GD07SCADBF 16GB SATADOM-MH 3SE, SLC flash, 2 channels, 260 MB/s (read), 130 MB/s (write)
DESMH-32GD07SCADBF 32GB SATADOM-MH 3SE, SLC flash, 2 channels, 260 MB/s (read), 130 MB/s (write)

SATADOM-MH 3SE (Industrial, W/T Grade, -40 to +85°C, Thermal Sensor)
DESMH-04GD07SWADB 04GB SATADOM-MH 3SE, SLC flash, 2 channels, 200 MB/s (read), 55 MB/s (write)
DESMH-08GD07SWADB 08GB SATADOM-MH 3SE, SLC flash, 2 channels, 210 MB/s (read), 65 MB/s (write)
DESMH-16GD07SWADB 16GB SATADOM-MH 3SE, SLC flash, 2 channels, 260 MB/s (read), 130 MB/s (write)
DESMH-32GD07SWADB 32GB SATADOM-MH 3SE, SLC flash, 2 channels, 260 MB/s (read), 130 MB/s (write)

SATADOM-MH 3SE with Pin7 VCC Supported (Industrial, W/T Grade, -40 to +85°C, Thermal Sensor)
DESMH-04GD07SWADBF 04GB SATADOM-MH 3SE, SLC flash, 2 channels, 200 MB/s (read), 55 MB/s (write)
DESMH-08GD07SWADBF 08GB SATADOM-MH 3SE, SLC flash, 2 channels, 210 MB/s (read), 65 MB/s (write)
DESMH-16GD07SWADBF 16GB SATADOM-MH 3SE, SLC flash, 2 channels, 260 MB/s (read), 130 MB/s (write)
DESMH-32GD07SWADBF 32GB SATADOM-MH 3SE, SLC flash, 2 channels, 260 MB/s (read), 130 MB/s (write)
AccessoriesN/A