Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

Innodisk SATADOM-ML 3ME2 - SATA Disk On Module MLC SSD

Up to 128GB Capacities, up to 510MB/s Read, up to 160MB/s Write

Introduction

Innodisk Serial ATA Disk on Module (SATADOM) supports SATA III standard (6.0Gb/s) interface with excellent performance, and SATADOM-ML 3ME V2 is designed as the smallest form factor size that could enhance compatibility with various design applications.

Particularly the 7th pin of SATA 7 pin connector and 8th pin on SATA connector can optionally be the built-in power VCC pin. In other words, it could be connected directly to the SATA on-board socket on customers’ system without additional power cable. Besides, the booting time for operation and the power consumption is less than hard disk drive (HDD).

Specification

Storage Specification

Model InfoSATADOM-ML 3ME2
Vertical mount
Flash TypeMLC
ConnectorStandard 7 pin SATA
Capacity16GB to 128GB
Channels4
PerformanceSequential R/W (MB/sec, max.): 510 / 160
Thermal SensorYes
H/W Write ProtectNo
DRAM BufferNo
ATA SecurityYes
SMARTYes
Data SecurityNot supported

General

Electrical1.68W (5V x 336mA)

Power - choice of:
• Power applied via 7 pin technology (motherboard support required)
• Power applied via 8 pin technology (motherboard support required)
• External two pin power connector (cable included)
Mechanical33.6 x 30 x 8.11 mm
TemperatureOperating: Standard Grade: 0 to +70°C
Operating: Industrial Grade: -40 to +85°C
Storage: -55 to +95°C
Vibration20G@7~2000Hz
Shock1500G@0.5ms
MTBF>3 million hours
Warranty2 Years
RoHSCompliant

Ordering Details

BoardTo be added - call for details if required.
AccessoriesN/A