Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

Innodisk SATADOM-ML 3ME3 V2 - SATA Disk On Module MLC SSD

Up to 256GB Capacities, up to 400MB/s Read, up to 140MB/s Write

Introduction

Innodisk Serial ATA Disk on Module (SATADOM) supports SATA III standard (6.0Gb/s) interface with excellent performance and SATADOM-ML 3ME3 V2 is designed as the smallest form factor size that could enhance compatibility with various design applications. Particularly the 7th pin of standard SATA 7pin connector can optionally be the built-in power VCC pin.

Innodisk SATADOM-ML 3ME3 V2 effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.

Specification

Storage Specification

Model InfoSATADOM™-ML 3ME3 V2
Vertical mount
Flash TypeMLC
ConnectorStandard 7 pin SATA
Pin 7 power option
Capacity32GB to 256GB
Channels4
PerformanceSequential R/W (MB/sec, max.): 400/140
Thermal SensorST- Optional/ WT- Default
H/W Write ProtectYes
DRAM BufferNo
ATA SecurityYes
SMARTYes
Data SecurityNot supported

General

Electrical0.85A (5V x 170mA )

Power - choice of:
• Power applied via pin 7 or pin technology (motherboard support required), part number ends in F
• External two pin power connector (cable included)
• PN end with A: Pin8 + power cable
• PN end with B: Pin8 + Pin 7 support
Mechanical33.6 mm x 30.0 mm x 8.11 mm
TemperatureOperating: Standard Grade: 0 to +70°C
Operating: Industrial Grade: -40 to +85°C
Storage: -55 to +95°C
Vibration20G@7~2000Hz
Shock1500G@0.5ms
MTBF>3 million hours
Warranty2 Years
RoHSCompliant

Ordering Details

BoardTo be advused
AccessoriesN/A