Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

Innodisk SATADOM-SH 3ME4 - SATA Disk On Module MLC SSD

Up to 64GB Capacities, up to 340MB/s Read, up to 60MB/s Write

Introduction

Innodisk SATADOM-SH 3ME4 is characterised by L3 architecture with the latest SATA III (6.0GHz) Marvell NAND controller. Innodisk’s exclusive L3 architecture is L2 architecture multiplied LDPC (Low-Density Parity-Check). L2 (Long Life) architecture is a 4K mapping algorithm that reduces WAF and features a real-time wear levelling algorithm to provide high performance and prolong lifespan with exceptional reliability.

Innodisk SATADOM-SH 3ME4 is designed for the industrial field and supports several standard features, including TRIM, NCQ, and S.M.A.R.T. In addition, Innodisk’s exclusive industrial-oriented firmware provides a flexible customization service, making it perfect for a variety of industrial applications.

The innovative Pin8 uses the SATA connector itself as a power supply to drive the device without external cables. It could be connected directly to the SATA on-board socket on customer’s system without an additional power cable. Besides, the booting time for operation and the power consumption is less than hard disk drive (HDD) and can work under harsh environment compile with ATA protocol, no additional drives are required, and the SSD can be configured as a boot device or data storage device.

Specification

Storage Specification

Model InfoSATADOM™-SH 3ME4
Horizontal mount
Flash TypeMLC
ConnectorStandard 7 pin SATA
Pin 7 power option
Pin 8 power option
Capacity8GB to 64GB
Channels1
PerformanceSequential R/W (MB/sec, max.): 340/60
Thermal SensorYes
H/W Write ProtectNo
DRAM BufferNo
ATA SecurityYes
SMARTYes
Data SecurityNot supported

General

Electrical0.65W (5V x 130mA)

Power - choice of:
• Power applied via pin 8 technology (motherboard support required) or external power cable, part number ends in A
• Power applied via pin 7 or pin 8 technology (motherboard support required), part number ends in B
Mechanical32.7 mm x 18 mm x 15.15 mm
TemperatureOperating: Standard Grade: 0 to +70°C
Operating: Industrial Grade: -40 to +85°C
Storage: -55 to +95°C
Vibration20G@7~2000Hz
Shock1500G@0.5ms
MTBF>3 million hours
Warranty2 Years
RoHSCompliant

Ordering Details

BoardSATADOM-SH 3ME4 (Industrial, Standard Grade, 0 to 70°C)
DESSH-08GM41BC1SC* 08GB SATADOM-SH 3ME3, MLC flash,
DESSH-16GM41BC1SC* 16GB SATADOM-SH 3ME3, MLC flash
DESSH-32GM41BC1SC* 32GB SATADOM-SH 3ME3, MLC flash
DESSH-64GM41BC1SC* 64GB SATADOM-SH 3ME3, MLC flash

SATADOM-SH 3ME4 (Industrial, W/T Grade, -40 to 85°C)
DESSH-08GM41BW1SC* 08GB SATADOM-SH 3ME3, MLC flash
DESSH-16GM41BW1SC* 16GB SATADOM-SH 3ME3, MLC flash
DESSH-32GM41BW1SC* 32GB SATADOM-SH 3ME3, MLC flash
DESSH-64GM41BW1SC* 64GB SATADOM-SH 3ME3, MLC flash

where
*=A for module to be powered via Pin 8 or power cable
*=B for module to be powered via Pin 8 or Pin 7
AccessoriesN/A