Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

Innodisk SATADOM-SV 3IE4 - SATA Disk On Module iSLC SSD

Up to 32GB Capacities, up to 340MB/s Read, up to 240MB/s Write

Introduction

Innodisk SATADOM-SV 3IE4 is characterised by L3 architecture with the latest SATA III (6.0GHz) Marvell NAND controller. Innodisk’s exclusive L3 architecture is L2 architecture multiplied LDPC (Low-Density Parity-Check). L2 (Long Life) architecture is a 4K mapping algorithm that reduces WAF and features a real-time wear levelling algorithm to provide high performance and prolong lifespan with exceptional reliability.

Innodisk SATADOM-SV 3IE4 is designed for the industrial field and supports several standard features, including TRIM, NCQ, and S.M.A.R.T. In addition, Innodisk’s exclusive industrial-oriented firmware provides a flexible customization service, making it perfect for a variety of industrial applications.

The innovative Pin8 uses the SATA connector itself as a power supply to drive the device without external cables. It could be connected directly to the SATA on-board socket on customer’s system without an additional power cable. Besides, the booting time for operation and the power consumption is less than hard disk drive (HDD) and can work under harsh environment compile with ATA protocol, no additional drives are required, and the SSD can be configured as a boot device or data storage device.

 

Specification

Storage Specification

Model InfoSATADOM-SV 3IE4 series
Vertical mount
Flash TypeiSLC
Connector8 pin SATA
Capacity8GB to 32GB
Channels1
PerformanceSequential R/W (MB/sec, max.): 340/230
Thermal SensorYes
H/W Write ProtectNo
DRAM BufferNo
ATA SecurityYes
SMARTYes
Data SecurityNot supported

General

Electrical0.945W (5V x 189mA)

Power - choice of:
• Power applied via pin 8 or external two pin power connector (cable included), part number ends in A
• Power applied via pin 7 or pin 8 methods (motherboard support required), part number ends in B
Note: version B does not support use of external power cable and one is not included with that model
Mechanical40.4 x 21.03 x 10.4 mm
TemperatureOperating: Standard Grade: 0 to +70°C
Operating: Industrial Grade: -40 to +85°C
Storage: -55 to +95°C
Vibration20G@7~2000Hz
Shock1500G@0.5ms
MTBF>3 million hours
Warranty5 Years
RoHSCompliant

Ordering Details

BoardSATADOM-SV 3IE4 with Pin8 VCC Supported and power cable with Toshiba 15nm (Standard Grade, 0 to +70°C)
DHSSV-08GM41BC1SCA 08GB SATADOM-SV 3IE4, MLC flash, 1 channels, 250 MB/s (read), 80 MB/s (write)
DHSSV-16GM41BC1SCA 16GB SATADOM-SV 3IE4, MLC flash, 1 channels, 340 MB/s (read), 160 MB/s (write)
DHSSV-32GM41BC1SCA 32GB SATADOM-SV 3IE4, MLC flash, 1 channels, 340 MB/s (read), 230 MB/s (write)

SATADOM-SV 3IE4 with Pin8 VCC Supported and power cableIndustrial Grade, -40 to +85°C)
DHSSV-08GM41BW1SCA 08GB SATADOM-SV 3IE4, MLC flash, 1 channels, 250 MB/s (read), 80 MB/s (write)
DHSSV-16GM41BW1SCA 16GB SATADOM-SV 3IE4, MLC flash, 1 channels, 340 MB/s (read), 160 MB/s (write)
DHSSV-32GM41BW1SCA 32GB SATADOM-SV 3IE4, MLC flash, 1 channels, 340 MB/s (read), 230 MB/s (write)
AccessoriesN/A