Memtech AT3515 Bulldog

Introduction

The AT3515 is an entry-level low cost solid-state flash drive, with a maximum capacity of 8Gbyte in an extremely compact low profile 3.5" form-factor. It is completely solid state, with no moving parts. This contributes to the unit's exceptional ruggedness and wide operating temperature range; with no moving parts, there is no mechanism for mechanical wear-out. Being 100% IDE compatible, no special drivers or flash file managers are required. It is a virtual drop in replacement for standard rotating media.

The AT3515 employs sector erasable NAND E2PROMs (Flash) to deliver up to 8Gbytes of uncompressed, non-volatile solid state storage in an extremely small, rugged form factor. Sequential sustained data throughput is up to 6 Mbytes/sec for reads and 6 Mbytes/sec for writes. The drive supports up to PIO Mode-4 and DMA Mode-2 bus access, multi-sector transfers, as well as LBA addressing. It is 100% IDE compatible and requires no special drivers to operate

The drive is implemented using a custom IDE Flash controller with multi-tasking technology. An integrated 72-bit Reed-Solomon error detection and correction mechanism and proprietary remapping and wear-leveling technology along with a power hold-up circuit greatly improve data reliability. Its' cost effectiveness and low-power operation make the AT3515 ideal for applications requiring high reliability at a low cost up to 8Gbytes of data storage.

The drive is available in a number of standard capacities from 128 to 8 Gbyte. Please contact the factory for specific size availability.

Each drive is fully tested under environmental and voltage extremes to guarantee data integrity under even the harshest conditions.

The drive may be mounted in any orientation. Bottom and side mounting holes are available that conform to the 3.5" IDE drive standard.