Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 
Kontron Embedded Modules

Kontron CF-CARD-Adapter

IDE to Compact Flash Adaptor For Kongtron PC/104 Boards

Pass Through IDE Header For CD-ROM/Additional Disk

 
Kontron CF-CARD-Adapter
  
  • Compact Flash to IDE converter
  • Fits directly onto Kontron PC/104 CPU
  • Cableless installation
  • 2mm 44 way IDE connectors
  • 1X 2mm 44 way IDE connector
  • Takes all size devices
  • Appears as a standard hard-disk
  • Bootable



Datasheet/Manual:

No datasheet available No datasheet available
No manual available No manual available
 

Introduction

The CF-CARD-Adapter allows the use of CompactFlash and Microdrive devices with compatible Kontron PC/104 boards such as theMOPSlcdLX. It is prepared for cable less connection via a 44 pin IDE interface. Via the additional 44 pin IDE pinheader hard drives can be connected as well as a CD-ROM drive. So it’s usable either as an embedded harddrive replacement or as exchangeable storage device .

With this adaptor, the host PC will identify the inserted Compact Flash as a standard IDE hard disk (i.e. with cylinders, heads and sectors). As such, you can install any operating systems and the compact flash card will be bootable. Due to this, the Compact Flash is not hot swappable.

With Kontron You stay...always a Jump ahead!

 
 

Specification
General:

Takes all size Compact Flash modules and IBM Microdrives
Limitation will be down to host motherboard
Compact Flash to IDE converter
Config:

Master / slave compatible
Bootable
Appears as a standard hard-disk with cylinders, heads & sectors

Connectors:

One 2mm pitch male 44 way IDE connector (for slave IDE device such as disk/cdrom)
One 2mm pitch femaile 44 way IDE connector (for attaching to host IDE interface)

Power:

Via 44 way IDE header from compatible PC/104 board

Mounting:

Additionally, for applications with EXTREME vibrations, there is a hole in the PCB which allows the adaptor to be screwed down to the host Kontron PC/104 board (which has an identical hole vertically underneath this hole) by use of suitable mounting stud and screws. Most applications won't need this (as the 44 way connector offers a great deal of retention.

Compatible Boards:

Kontron MOPSlcdLX
Kontron MOPS/520
Kontron speedMOPSlcdPM (Note - speedMOPSlcdPM does not have mounting hole, see above section)

Dimensions:

42 x 53 mm without CF Card or Microdrive.
12mm height without CF Card or Microdrive.

ROHS Status:

This product is lead free/ROHS compliant.

Ordering Details:
Board:

40404 CF-CARD-Adapter CF-CARD to IDE (44pin) interface

Please note that boards are supplied with no cables, software or manuals.
Accessories:

96021-0000-00-0 Cable IDE-2MM (44 to 44 way IDE cable)
Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2008 Diamond Point International. All rights reserved.