Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 
Diamond Systems Corporation

Diamond Systems Flash Disks

Flash-Disk, Fully IDE Compatible, Up To 4GB In Size

Ideal Solid State Storage Solution For DSC PC/104 Boards

 
Diamond Systems Flash Disks
 
  • Fully IDE compatibility
  • Uses 2mm 44 way IDE connector
  • Solid state - no moving parts
  • Small footprint
  • Sizes from 128MB to 4GB
  • Withstands vibrations and shocks
  • Ideal for embedded applications
  • Fully bootable



Datasheet/Manual:

No datasheet available No datasheet available
No manual available No manual available

 

DSC FD fittingIntroduction

Install an IDE flashdisk module onto any of the Diamond Systems' CPU boards (such as the Helios, Athena II or Hercules SBCs) for rugged, lightweight, solid-state mass storage.

The flashdisk module works just like an IDE drive and requires no drivers. It provides high-speed nonvolatile mass storage in capacities of 128MB to 4GB.

The flashdisk mounts on the IDE connector and is held in place with a spacer and screws (included). It includes a master/slave jumper and operates over -40ºC to +85ºC.

 
 

ACC-IDEEXT Extender BoardFlashdisk Programming Board

The ACC-IDEEXT accessory board lets you connect a flashdisk and an IDE drive (hard disk or CD-ROM), or two IDE drives, to your Diamond systems CPU.

You can also use it to load files from your desktop computer onto a flashdisk module prior to installing the flashdisk onto the CPU.

The ACC-IDEEXT board includes 40-pin and 44-pin mating connectors for compatibility with almost any computer and IDE device. 40-pin and 44-pin ribbon cables are included.
 
 

Specification

General:

Fully IDE hardware compatible flash disk
Directly plugable on to a 2.5" IDE header

Sizes:

128MB, 256MB, 512MB, 1GB, 2GB & 4GB

Chipset:

SST controller, Samsung flash

Features:

Needs no special installations or formation software
Appears as a standard IDE disk with cylinders, heads and sectors
Can be used with any operating system which works with a standard IDE hard-disk
44 Pin 2mm IDE plug connection (plugs directly onto a 44 way 2mm male header)
Mounting hole for fixing to DSC CPU boards

Weight:

Approximately 20g

Operating voltage:

+3.3V ± 5% or +5V ± 10%

Power consumption:

Sleep mode: < 1 mA
Reading: < 80 mA
Writing: <100 mA

Startup time:

sleep to write: 2,5 ms max
sleep to read: 2.0 ms max
reset to ready: 50 ms typ. 400 ms max

MTBF:

at 25°C: > 1 million hours

Temperature:

-40 to +85ºC operation

Max. humidity:

operation: 10% to 90%
storage: 5% to 95%

Operating Systems:

Product is fully IDE compatible - if the O/S works with a standard rotating disk, it will work with this.

ROHS Status:

This product is lead free/ROHS compliant.

Ordering Details:

Board:

FD-128R-XT Flash Disk, 128MB, Extended Temp
FD-256R-XT Flash Disk, 256MB, Extended Temp
FD-512R-XT Flash Disk, 512MB, Extended Temp
FD-1GR-XT Flash Disk, 1GB, Extended Temp
FD-2GR-XT Flash Disk, 2GB, Extended Temp
FD-4GR-XT Flash disk, 4GB, Extended Temp.

Please note that boards are supplied with no cables, software or manuals.

Accessories:

ACC-IDEEXT IDE flashdisk extender board; includes 40-pin and 44-pin IDE cables
CC-FD Conformal Coating, FlashDisk, all sizes (AEP)

Order Online!

 

ORDER ONLINE - this product is available to order on our online webshop.

Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2012 Diamond Point International. All rights reserved.