Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 
STEC

STEC Mach1

1.8" IDE Solid State Flash Drive

ZIF Style Connector, 5mm Case Height, Upto 16GB Capacity

 
STEC Mach1 1.8" Drive
  
  • 4GB, 8GB & 16GB capacities
  • 0°C to +70°C temp range standard
  • -40°C to +85°C temp range option
  • 1.8" drive form-factor
  • 40-pin, ZIF type connector
  • 3.3 volt, low power operation
  • Completely solid state
  • 1,500G, MIL-STD-810F shock
  • 16.3G RMS, MIL-STD-810F vibration
  • 10 year data integrity
  • RoHS compliant
  • 5 year warranty



Datasheet/Manual:

Datasheet to be added Datasheet to be added
Manual to be added Manual to be added

 

Introduction

STEC's Mach 1.8-inch Solid State Drive is a small form factor, rugged memory and storage solution for mission-critical systems in a variety of industries. It is used as a drop-in replacment for standard rotating 1.8-inch hard disk drives.

The Mach1 utilises the popular ZIF connector:

ZIF connector

 
 

Specification
Interface:

ATA-5
PIO Mode 4
Multiword DMA 2
Capacity:

Unformatted 4, 8 and 16GB
Performance:

Burst transfer rate: 16.6 MB/sec
Sustained read throughput: 10 MB/sec
Sustained write throughput: 7 MB/sec
Latency, Average: 0.5 msec
Environmental:

Operating temperature

  • Commerical: 0°C to +70°C
  • Industrial: -40°C to +85°C

Storage temperature: -55°C to +95°C
Humidity: 5% to 95% relative, non-condensing
Operating altitude: -1000 feet to 80,000 feet
Operating shock: 1,500G, MIL-STD-810F
Operating vibration: 16.3G RMS, MIL-STD-810F (random, 20Hz to 2000 Hz; 3 vibration axes)
Reliability:

MTBF 2.3 million hours (Bellcore Issue 6, Method I, Case 3)
Data Integrity 10 years
Power:

Input voltage 3.3V ± 5%
Typical consumption Idle/standby: 0.1 W
Sustained read/write: 0.3 W
Start/Maximum: 0.4 W
Physical:

Form factor: 1.8-inch
Dimensions (mm): 71.0mm (L) x 54.0mm (W) x 5.0mm (H)
Weight: < 40 g
Connector: 40 pin(4GB), 41 pin (8GB) or 42 pin (16GB), ZIF type connector
Warranty:

5 years
Customization:

Conformal coating
Manufacturing:

Santa Ana, CA, United States
ISO 9001:2000 and ISO 14001:2004 Certified
ROHS Status:

This product is lead free/ROHS compliant.

Ordering Details:
Board:

M1A14C Mach1 Drive, 4GB capacity, standard temperature range (0°C to +70°C)
M1A18C Mach1 Drive, 8GB capacity, standard temperature range (0°C to +70°C)
M1A116C Mach1 Drive, 16GB capacity, standard temperature range (0°C to +70°C)

M1A14I Mach1 Drive, 4GB capacity, industrial temperature range (-40°C to +85°C)
M1A18I Mach1 Drive, 8GB capacity, industrial temperature range (-40°C to +85°C)
M1A116I Mach1 Drive, 16GB capacity, industrial temperature range (-40°C to +85°C)

Please note that boards are supplied with no cables, software or manuals.
Accessories:

N/A
Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2008 Diamond Point International. All rights reserved.