Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 
Runcore

Runcore Kylin II SATA SSD

50GB to 400GB capacity - up to 30000 IOPS - 3 year warranty

Sustained read/write: 250 to 280 MB/s, MLC/SLC versions
 
Runcore Invincible III PATA 2.5" DOM SSD Drives
  
  • 50GB to 400GB capacities
  • Standard Temperature 0°C to 70°C
  • SLC flash/MLC flash option
  • Completely solid state
  • Sustained read/write: 250 to 280 MB/s
  • 30,000 IOPS (4K random read & write)
  • 10,000,000 hour MTBF
  • 3 year warranty
  • Appears as a standard hard-disk



Datasheet/Manual:

Runcore Kylin II SATA SSD datasheet in PDF format Datasheet in PDF format
Runcore Kylin II SATA SSD manual in PDF format Manual in PDF format

 

Introduction

RunCore Kylin II SATA Interface SSD is the leading enterprise class SSD which adopts an advanced SSD controller and high-speed NAND Flash which results in an excellent sequential write/read performance and random write/read IOPS.

Embedding proprietary DuraClass technology for SSD , ™ longetivity, reliability and data integrity. Using R.A.I.S.E™ data protection technology can overcome the probabilistic risk of page or block failure inherent in all Flash memory technology.

Kylin is the series of commercial products (single drive and board), matched the demand of Data Center, Enterprise Website, Search Engine and the Storage Center in Finance, Telecommunications, Government and Enterprise.

Flash Management Features Dura Class™ Technology

  • DuraWrite™ extends the endurance of SSDs
  • Intelligent Block Management and Wear Leveling
  • Intelligent Read Disturb Management
  • Intelligent “Recycling” for advanced free space management
  • RAISE™ (Redundant Array of Independent Silicon Elements)
 
 

Specification

Interface:

Supports ATA-8 commands
Interface SATA II (SATA 3.0Gb) Standard
NCQ support (up to 32 commands)
SMART support
Transfer Mode

  • PIO mode (0 to 4)
  • DMA mode (0 to 2)
  • Ultra DMA mode (0 to 6)

Capacity:

SLC NAND FLASH: 50/100 GB
MLC NAND FLASH: 50/100/200/400 GB

Form Factor:

2.5" form factor, 9mm height
Standard SATA power/data connectors

Performance:

Sustained Sequential Read 250 MB/s to 280 MB/s
Sustained Sequential Write 250 MB/s to 270 MB/s
4K Random Read & Write: 30,000 IOPS

Power:

Voltage Input:5V ± 5%
Typical Power: 950mW
Idle Power: 50mW

Reliability:

Data Encryption: 128-bit AES-compliant, User Selectable Encryption
ECC Recovery: Up to 24 bytes correctable per 512-byte sector
MTBF: 10,000,000 operating hours
Intelligent Block Management and Wear Leveling
Intelligent Read Disturb Management

Environment:

0°C to 70°C operating
-40°C to 90°C storage

Physical:

100.2mm x 69.8mm x 9.8mm
140g weight

Warranty:

3 years warranty

ROHS Status:

This product is lead free/ROHS compliant.

Ordering Details:

Drive:

SLC Drives:
RCK-II-S2550-SCN 50GB Kylin II SATA SSD
RCK-II-S2510-SCN 100GB Kylin II SATA SSD

MLC
RCK-II-S2550-MCN 50GB Kylin II SATA SSD
RCK-II-S2510-MCN 100GB Kylin II SATA SSD
RCK-II-S2520-MCN 200GB Kylin II SATA SSD

All drives come in retail packaging.

Accessories:

N/A

Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2010 Diamond Point International. All rights reserved.