Diamond Point International

Sitemap - Print Page - Email Link - RSS News Feed RSS

 
STEC

STEC Zeus Z2A

2.5" IDE Solid State Flash Drive, Upto 64GB In Size

44 Pin IDE Interface, 5 Year Warranty

 
STEC Zeus Z2A
  
  • Upto 64GB under 9.5mm
  • -40°C to +85°C temp range
  • 2.5" drive form-factor
  • UDMA-66 compliant IDE interface
  • 44 pin, 2mm IDE interface
  • 5 volt, low power operation
  • Completely solid state
  • 1000G operating shock
  • 16.3G operating vibration
  • 10 year data integrity
  • 5 year warranty



Datasheet/Manual:

STEC Zeus Z2A datasheet in PDF format Datasheet in PDF format
STEC Zeus Z2A manual in PDF format Manual in PDF format
 

Introduction

The Z2A Zeus solid-state flash drive is a UDMA-66 compliant IDE memory module offered in an extremely low profile 2.5 inch drive form-factor. The drive is completely solid state, with no moving parts. This contributes to the unit's exceptional ruggedness and wide operating temperature range; with no moving parts, there is no mechanism for mechanical wear-out. As the drive is 100% IDE compatible, no special drivers or flash file managers are required to interface to the drive. This makes the drive a virtual drop in replacement for standard rotating media but with superior performance, ruggedness and reliability.

The primary storage media in the drive is sector-erasable NAND E2PROMs (Flash). Using these SLC devices, STEC is able to deliver up to 64 Gbyte of uncompressed, non-volatile solid-state storage in an extremely small, rugged form- factor. The UDMA interface supports 66-Mbyte per second burst throughputs, and with an access time for the drive under 0.1 milliseconds, thousands of transactions can occur per second. In addition to the extremely high IO capability of the drive, the sustained read and write performance is exceptional at up to 40 Mbytes/sec.

The Zeus, with its high-capacity and high-throughput, is a rugged memory and mass storage solution ideal for mission-critical systems in a variety of industries. Applications include data recorders, image exploitation computers, navigation systems, oil pipeline monitors, scientific equipment, RAID systems, financial transaction processing systems, media server equipment, and communications equipment.

The Z2A is available now in standard capacities ranging from 4 to 64 Gbyte, all in the same, 9.5mm low profile solution. Every drive is subjected to STEC's exacting EnduroTest(TM) in which each drive is fully tested under environmental and voltage extremes to guarantee data integrity under even the harshest conditions, and to ensure full functionality out of the box.

The Z2A may be mounted in any orientation. Sixteen mounting holes are available: eight on the bottom and eight on the sides. All holes are tapped 3mm with a maximum penetration of 4mm.
 
 

Specification
Capacity::

8GB - 64 GB (unformatted)

Compatibility:

ANSI-INCITS 361-ATA-6; ANSI-INCITS 340-ATA-5; ANSI-INCITS 317-ATA-;
ANSI-X3.298-1997-ATA-3; ANSI-X3.279-1996-ATA-2
Performance:

Sustained Read/Write (MB/s): 40MB/sec read, 26MB/sec write

Physical:

Form factor: 2.5-inch
Dimensions: (mm) 100.2 (L) x 69.8 (W) x 9.5 (H)
Weight: < 0.2 kg
Environmental:

Operating temperature

  • Commercial: 0°C to + 70°C
  • Industrial: -40°C to +85°C
  • Storage temperature -55°C to +95°C

Humidity: 5% to 95% relative, non-condensing
Operating altitude: (maximum) 80,000 feet
Operating shock: 1,500G, MIL-STD-810F
Operating vibration: 16.3G RMS, MIL-STD-810F (random, 20Hz to 2000 Hz; 3 vibration axes)
Power:

Input voltage: 5VDC ± 5%
Typical consumption

  • Idle/standby: 2.2 W
  • Sustained read/write: 2.2 W
  • Sanitize: 3.1 W
Compliance:

CE, UL, EN 55022 Class, CISPR 22 Class B, AS/NZS 3548 Class B, BSMI CNS 13438 Class B, CAN/CSA-V-3/2001.04 (VCCI), FCC Part 15 Class B, EN 61000-3-2, EN 61000-3-3, IEC 61000,
MIL-STD-167-1, MIL-STD-810F, MIL-STD-901D
Purge Features:
  • BasicPurge™ Erase solid state drive
  • RapidPurge™ Erase solid state drive in seconds
  • MilPurge™ Erase solid state drive in compliance with security guidance (DoD 5220.22-M, NSA 130-2, AFSSI 5020, AR 380-19, and Navso 5239)
  • Intelligent Destructive Purge™ Physically damages the flash media to make it totally unusable as media
User Interface & Configuration:

Interface: 16-bit
Master/Slave mode: Jumper-selectable
ATA transfer modes: PIO 0-4, DMA 0-2, UDMA 0-5
Firmware upgrade: Field upgrade capability
Format: Low-level format at factory; shipped with NTFS format
No drivers required

Warranty:

5 years
Customization:

Form factor
Sustained read/write throughput
Storage capacity
Purge features
Conformal coating
Manufacturing:

Santa Ana, CA, United States
ISO 9001-2000 Certified
ROHS Status:

This product is lead free/ROHS compliant.

Ordering Details:
Board:

Z4A28C 8GB capacity 40R/26W 2.5" 44 pin IDE flash drive IDE/UDMA66
Z4A216C 16GB capacity 40R/26W 2.5" 44 pin IDE flash drive IDE/UDMA66
Z4A232C 32GB capacity 40R/26W 2.5" 44 pin IDE flash drive IDE/UDMA66
Z4A264C 64GB capacity 40R/26W 2.5" 44 pin IDE flash drive IDE/UDMA66

Please note that boards are supplied with no cables, software or manuals.
Accessories:

N/A
Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.
 
© 2008 Diamond Point International. All rights reserved.