Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

MEN Mikro MH50C - MEN Train Control System (MTCS) Controller for Rolling Stock

SIL 4 MEN Train Control System MTCS

MEN Mikro MH50C - MEN Train Control System (MTCS) Controller for Rolling Stock
Key Features
SIL 4 MEN Train Control System MTCS
Certified safe CPU board with 3 CPUs
Certified safe I/O boards
QNX® safe operating system available
Compact 19" application-ready system
Rack-mounted or wall-mounted
Fanless operation or forced-air cooling

Introduction

MH50C is the central controller of the MEN Train Control System MTCS. It is a modular system platform usable for safety-critical train applications like train control, automatic train operation (ATO) and automatic train protection (ATP) up to SIL 4.

Modular, built-to-order I/O configuration:

Being based on modular half-19" CompactPCI®, the system is always configured with a safe system CPU, a real-time Ethernet card, a power supply unit and a shelf controller. Other cards are added as built-to-order (BTO) options or by the user. The safe I/O cards support the common I/O requirements requested in trains.

The composition of safe CPU card, safe train I/Os and interfaces, such as MVB, CAN or serial interfaces to connect to legacy train equipment makes the controller ideal for use in safety-critical rolling stock applications.

Webinar: MTCS - Modular Train Control System

Application-ready, open platform:

The MH50C is an application-ready, open platform. This means that the user adds his application based on the basic operating system and driver software.

Part of the MEN Train Control System MTCS:

MTCS is a modular SIL 4 certifiable family of CompactPCI®-based standard products usable for every kind of safety-critical railway application - from a single function to the main control system of the train. It can be configured to control anything in the train that requires functional safety - under SIL 4, SIL 3 or SIL 2 requirements.

MTCS communicates via standard real-time Ethernet and interfaces to any type of consist fieldbus network like MVB, CANopen, Profinet etc. This makes it easy to integrate into a TCN network as well as into regionally different Train Control Systems like ETCS, CTCS, ATCS or Klub-U. The high level of flexibility of MTCS results in significant cost and time savings during computerization of the train.

Certification and standards compliance included:

MTCS components come with certification packages and complete support for the safe operating system QNX® (PikeOS on request), including safe protocols, CST layer, I/O transfer layer etc. and is ready to work with the Flexisafe PLC software, again saving cost and time for implementation and for certification of the final system.

MTCS is developed according to EN 50128 and EN 50129 standards and complies with all environmental requirements of EN 50155: temperature class Tx, shock, vibration, humidity, dust, isolation, PSU hold-up times, EMC regulations etc.

Mounting and cooling options:

The system can be wall or rack-mounted, and can be cooled by natural convection or using an additional fan tray at the bottom of the system. Cooling is independent of the mounting position.

Specification

CPU

CPU SpecDepends on configuration - refer to datasheet or contact us for guidance
Front I/ODepends on configuration - refer to datasheet or contact us for guidance

General

Warranty2 Years
RoHSCompliant

Ordering Details

Board19MH50CB0
The MH50C is a build-to-order system which is delivered fully operational with QNX for the safe domain, Linux for the I/O domain, and PACY (Process Data Framework for Cyclic Applications) - including all necessary drivers.

It consists of the 9.5" basic system including backplane and mounting rails and provides:

• 1 slot for PSU
• 1 CompactPCI PlusIO slot for the CPU board
• 7 CompactPCI peripheral slots
Accessories06K001-00 K1 - 8 digital outputs, SIL 2 (SIL 4), -40 to +85C qualified, conformal coating
06K002-00 K2 - 16 digital inputs, SIL 2 (SIL 4), -40 to +85C qualified, conformal coating
06K004-00 K4 - 4 frequency inputs, SIL 2 (SIL 4), -40 to +85C qualified, conformal coating
19KT08-B0 KT8 - Build to order MTCS Extension, 8 Cards
CustomisationNeed storage and/or I/O cards added? Need an operating system or your own software image loaded? We can help with that. We have a team of qualified and experienced engineers who can quickly accomplish this. Please contact us for further details.

Need storage - try Innodisk SSD