Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

MEN Mikro MH70I - Rugged 19" Modular Industrial PC

Compact 19" Modular Application-Ready System

Introduction

The MH70I is a modular application-ready industrial PC which meets the requirements of any industrial environment, e.g., control stations for industrial automation or in-vehicle applications. The PC offers a multitude of configuration possibilities which are built to order resulting in a fast time-to-market. The system comes with complete software support.

The Intel® Core™ i7-based system consists of a modular half 19" CompactPCI® system which can be wall or rack-mounted. The system can be cooled by natural convection or using an additional fan tray at the bottom of the system. Cooling is independent of the mounting position.

The pre-configured system offers two PSU slots to ensure reliability and redundancy. Normal operation is guaranteed if at least one external voltage is present. AC or DC power supplies or an uninterruptible power supply (UPS) can be implemented.

Two CompactPCI® peripheral slots and two CompactPCI® Serial peripheral slots as well as 2 PCI or PCI Express® slots can accommodate a large range of functions. If the 2 PCI or PCI Express® slots are not required, two additional CompactPCI® Serial peripheral slots are available.

Possible functions of the MH70I include binary and analog process I/O or motion counters as well as COMs and fieldbus functions such as CANopen, DeviceNet, Real-Time-Ethernet (EtherCAT, EtherNet/IP, Modbus, POWERLINK, PROFINET, SERCOS, Varan) and PROFIBUS (master and slave for all functions).

The system always offers 2 Gigabit Ethernet interfaces at the front of the CPU board. For extending the Ethernet functionality, there is the possibility to implement up to 8 additional standard RJ45 or fiber optics Ethernet interfaces in the Compact PCI Serial slots.

PCI Express® Mini cards for wireless functions such as WLAN and UMTS can also be provided. A SATA RAID can be built using up to four CompactPCI® Serial hard disk carrier boards.

The two PCI or PCI Express® slots can be equipped with half-length cards for further customized extension of the system.

Specification

CPU

CPU SpecF22P - 3U CompactPCI® PlusIO Intel® Core™ i7 CPU Board
• Intel® Core™ i7-3615QE or
• Intel® Celeron® 1047UE
Ethernet interfaces
• Two 10/100/1000Base-T Ethernet channels at the front
• RJ45 connectors at front panel
Graphics interface
• 1 standard VGA connector
USB
• Two USB 2.0 ports via Series A connectors at front panel
ExpansionFunctionality on CompactPCI® peripheral slots 1 and 2
PCI Express® Mini card slots, e.g. for
• WLAN PCIe® MiniCard (USB) half size
• UMTS PCIe® MiniCard (USB) half size

Functionality on SA-Adapters
• RS232
• RS422
• RS485
• CAN bus

Functionality on M-Modules
• Binary I/O
• Analog I/O
• Motion counter

Functionality on Hilscher Industrial Field Bus Boards
• CANopen master and slave
• DeviceNet master and slave
• Real-Time-Ethernet (EtherCAT, EtherNet/IP, Modbus, POWERLINK, PROFINET, SERCOS, Varan) master and slave
• PROFIBUS master and slave

Functionality on CompactPCI® Serial slots 1 and 2
Ethernet interfaces
• Four 10/100/1000Base-T or 1000Base-SX interfaces
• 4x2 status LEDs to signal link status and activity

Two shuttles for 2.5" SATA HDD/SSD
• Hot swap support
• RAID levels 1 and 5
• Automatic Rebuild
• SMART Monitoring

Functionality on CompactPCI® Serial slots 3 and 4
2 PCI cards for customized functionality
2 PCI Express® cards for customized functionality
Two shuttles for 2.5" SATA HDD/SSD
• Hot swap support
• RAID levels 1 and 5
• Automatic Rebuild
• SMART Monitoring

General

Electrical2 PSU slots for power supply redundancy
• Normal operation if at least one external voltage is present
• Separate power inlet connectors
• Power Status LEDs
Primary PSU slot
• 100..240VAC
• 24..110VDC: input voltages according to EN50155, power interruption class S2 (10 ms)
Secondary PSU slot
• 100..240VAC
• 24..110VDC: input voltages according to EN50155, power interruption class S2 (10 ms)
• UPS (uninterruptible power supply)
MechanicalHalf 19" system (4U, 40HP)
1/2 19" rack-mount standard
3U card vertical
Dimensions: max. 210 x 175 x 225 mm without brackets
Mounting Possibilities
• Wall-mount
• Rack-mount in 19" cabinet
• Two systems side-by-side to build a single 19" chassis
Cooling Possibilities
• Natural convection
• Fan tray at system bottom (2 fans with an airflow of 1m/s)
Air Flow
• If bottom and top not covered, air flow from bottom to top outlets
• If bottom and top covered, air flow from bottom front to top front outlets
SoftwareWindows® Embedded Standard 7
Linux (Ubuntu with current LTIB kernel)
TemperatureTemperature range (operation): 0..+50°C according to EN 60068-2-1, EN 60068-2-2
Temperature range (storage): -40..+85°C according to IEC 60068-2-1, IEC 60068-2-2
HumidityRelative humidity (operation): according to EN 60068-2-30, EN 50155
Relative humidity (storage): max. 95% non-condensing
Vibrationaccording to EN50155
Shockaccording to EN50155
Safety/CertificationInformation technology equipment test according to EN 60950-1, class I equipment
EMCEN 55022 class B, EN 50121-3-2, FCC Part 15 class B DoC (radiated emission)
EN 55022 class B, EN 50121-3-2, FCC Part 15 class B DoC (conducted emission)
EN 55024, EN 50121-3-2 (immunity)
Warranty2 Years
RoHSCompliant

Ordering Details

Board19MH70IB0
The MH70I is a build-to-order system which is delivered fully operational under Windows® Embedded Standard 7 or Linux. It consists of the 19" basic system including backplane and mounting rails and provides:
- 2 slots for PSU
- 1 CompactPCI® PlusIO slot for the CPU board
- 2 CompactPCI® peripheral slots
- 2 CompactPCI® Serial peripheral slots
- 2 PCI/PCIe® slots or alternatively 2 additional CompactPCI® Serial peripheral slots
AccessoriesN/A
CustomisationNeed storage and/or I/O cards added? Need an operating system or your own software image loaded? We can help with that. We have a team of qualified and experienced engineers who can quickly accomplish this. Please contact us for further details.

Need storage - try Innodisk SSD