Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

Contec GP-IB(USB)FL - GPIB Communication Converter for USB2.0

External USB Product - Four RS-232 Compatible Serial Ports with Standard DB9 Connector

Introduction

Contec's GP-IB(USB)FL is a micro converter that enables GPIB communication simply by connecting to the USB interface of your PC. The connection to each communication control device can be established by using the interface complies with IEEE-488.1 and IEEE-488.2 standards.

  • The converter complies with the USB2.0/USB1.1 standard and so high-speed transfer (480Mbps) is possible. 
  • It can communicat with Machinery, which has communication interface base on 488.2 IEEE - standard at a transfer speed of greatest 1.5Mbyte/sec. It carries FIFO memory of each 2Kbyte for sending and receiving data, and can communicate fast without affecting quantity of data.
  • As well as a basic function of GPIB controller (µPD7210), It also be equipped with an event (SPAS) outbreak function in the serial pole (when slave). The system construction of high freedom degree is possible.
  • Because it is equipped with a high-speed GPIB controller(upwardly compatible with the µPD7210) of the own company development, Stable supply is possible.
  • It attach a diagnostic program as a tool to support the construction of the system. The diagnostic program can be used to check hardware operation (interrupts and I/O addresses) and to perform simple communication tests with connected devices. 
  • This product does not support Windows 64bit version.

Specification

Interface

FeaturesNumber of channel: 1 channel, conforms to IEEE-488.1, 488.2(GPIB) standards
Transfer format: 8-bit parallel, 3-wire handshake system
Transfer rate: 1.5Mbyte/sec
Data buffer size: 2Kbyte send, 2Kbyte receive
Signal logic: Negative logic, L level : 0.8V or less, H level : 2.0V or more
Cable length between device: 4m or less
Total cable length: 20m or less
Connectable number of devicea: 15 devices (Max.)

General

ExpansionUSB Specification 1.1/2.0 standard
Electrical5VDC 450mA (Max), bus powered
Mechanical62(W) x 64(D) x 24(H) mm (No protrusions)
Cable length: 1.8m
SoftwareWindows Vista, XP, Server 2003, 2000, Me, 98 (32 bit only)
LabVIEW compatible driver
TemperatureTemperature range (operation): 0 to +50°C
Humidity10 - 90%RH(No condensation)
Weight70g (Not including the USB cable)
Warranty1 Year
RoHSCompliant

Ordering Details

BoardLRBN67
GP-IB(USB)FL Low price High-speed GPIB Communication Micro Converter
AccessoriesCN-GP/C GPIB Counter Adapter
PCN-T02 GPIB Cable (2m)
PCN-T04 GPIB Cable (4m)