Diamond Point International
 
Advanet Inc

Advanet Advme1208

VME Bus 32 Point Digital Input Board

Simultaneous 32 Point Sampling

 
Advanet Advme1208
 
  • 32-point digital input board
  • Simultaneous 32-point sampling
  • Can set 8 point INT i/p using DI0 to 7
  • Device driver for VxWorks (option)



Datasheet/Manual:

Advanet Advme1208 datasheet in PDF format Datasheet in PDF format
Manual available on request Manual available on request

 

Introduction

The Advme1208 is a 32-point digital input VME board capable of simultaneous 32-point sampling. The board has a jumper setting to enable a debounce filter with a time constant of 10ms to absorb noise due to switch chattering and relay contact bounce. It is possible to set an 8 point interrupt input using DI0 to 7. There is a power fail warning register to check DC-DC converter output voltage surges and an LED display of input values for every eight points. Lastly, there is a device driver for VxWorks (option).

 
 

Specification

Digital input: No. of channels : 8 channels (8 channels per common x 4)
Rated input voltage : DC12V to 24V
Rated input current : Typ. 13mA (for DC24V input)
Input connector : MIL-type 50-pin header
Isolation:

Isolation method: Photo-coupler isolation
Withstanding voltage:

  • Between input and system: AC1500V for one minute
  • Between input and channels: AC1500V for one minute
Interrupt: Can set 8 point interrupt input using DI0 to 7
LED display: LED display of input values for every eight points
Bus interface: VMEbus Revision C.3 compliant A16, D16, D08 (EO)
Accessible using AM codes 29H and 2DH
Power requirements: DC5V±5% (supplied by VME bus) up to 2A
Board size: 262mm x 172mm x 20mm
Double height/Single slot (excluding protrusions such as connectors)
Weight: 360g (typ.)
Operating Systems: VxWorks
ROHS Status: This product is currently not lead free/ROHS compliant.

Ordering Details:
Board:

Advme1208 32-channel Digital Input VME Board

Accessories: N/A
Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.

 
© 2008 Diamond Point International. All rights reserved.