Diamond Point International
 
Advanet Inc

Advanet Advme7509

PowerPC VME Bus CPU Board with 600MHz CPU

IBM PowerPC CPU, Bootrom, PMC Slot, CF & Dual LAN

 
Advanet Advme7509
 
  • PowerPC750FX (600MHz) CPU
  • 256 or 512MB ECC Memory
  • Bootrom, PMC slot
  • VxWorks support
  • Onboard CompactFlash option
  • Dual 10/100Base-T Ethernet



Datasheet/Manual:

Advanet Advme7509 datasheet in PDF format Datasheet in PDF format
Manual available on request Manual available on request

 

Introduction

The Advme7509 is a single-slot 6U VME board utilizing a PowerPC750FX processor. The board can be used as a system controller to meet high performance system requirements. The front panel includes two 10/100BASE-TX Ethernet ports and four RS232 serial ports. A variety of memory, including SDRAM (up to 512MB), CompactFlash, FlashROM, SRAM, and EEPROM are available. The external VME bus is accessible via the on-board “NARUTO II" PCI-VME bridge.

Front Panel

Advme7509 front view

Block Diagram

Block diagram of Advme7509

 
 

Specification

CPU: IBM PowerPC750FX (600MHz )
L1 cache:32KB/32KB
L2 cache:512KB w/ parity
Memory: 256-512MB SDRAM (supports EC/ECC functions)
512KB Boot ROM Flash Memory (accommodating Advanet's T4th boot loader)
512KB SRAM for backup of 256 Bytes
Serial EEPROM
CompactFlash socket supporting 3.3V modules
Peripheral: 4 RS-232 Serial ports (using RJ-45 connector)
2 10/100Base-T Ethernet (RJ-45)
Single 64-bit PMC slot
Battery backup
RTC
PCI-VME Bridge: [NARUTO II] (Advanet's original)
VME Bus: Bus width complies with A32/A24/A16 D32/D16/D08 (EO) Rev.C.3
Functions as master/slave, system controller, interrupter, interrupt handler, system reset, input/output
Board size: Double height and single slot width
Power requirements: DC5V only , 6.5A max. (Excluding PMC)
Operating Systems: VxWorks
ROHS Status: This product is currently not ROHS compliant but is Pb free.

Ordering Details:
Board:

Advme7509 VME Board with IBM PowerPC750FX 600MHz 512MB memory

Accessories: N/A
Further Information:

Want further information or pricing on this product? Either fill out our feedback form or contact us for further information.

 
© 2008 Diamond Point International. All rights reserved.