Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

Aitech TM102 - Transition Module for C102 VME SBC

Eliminates Need for Harnessing and Complex Cabling With C102 I/O Interfaces

Introduction

Aitech’s TM102 transition module is designed as a supplement to the C102 Dual PowerPC® 7448 VME SBC, and intended for use in commercial air-cooled enclosures. The TM102 eliminates the need for harnessing and complex cabling fixtures when connecting to the C102.

Both front plug-in unit and rear plug-in unit versions are available, and both versions come in both double-slot and single-slot configurations.

The front plug-in kit is for use with enclosures that support only front plug-in units, or for use with enclosures that support both front and rear plug-in units where the user requires front-panel access to the I/O connections. The TM102 rear plug-in unit is for use with enclosures that support both front and rear plug-in units where the user requires rear-panel access to the I/O connections.

The TM102 is designed for use with enclosures with a rear module depth of 80 mm, and is fully compliant with the IEEE 1101.11 specification. The TM102 may be adapted for use with enclosures whose rear module depth is greater than 80 mm by adding an extender (not included).

The single-slot configuration provides access to the following C102 I/O channels: two Gigabit Ethernet ports, two Fast Ethernet ports, one Serial ATA port, two USB ports, two dual redundant MIL-STD-1553B ports (via a 15-pin D-type connector used together with an adapter that slits into four twinax connectors), two multi-protocol high-speed serial ports supporting RS-232/422/485 and two standard UART ports supporting RS-232/422/485, and 16 single-ended or 8 differential discrete I/O channels.

The double-slot configuration provides access to all C102 I/O channels: two Gigabit Ethernet ports, two Fast Ethernet ports, one Serial ATA port, two USB ports, two dual redundant MIL-STD-1553B ports (via four twinax connectors), six multi-protocol high-speed serial ports supporting RS-232/422/485 and two standard UART ports supporting RS-232/422/485, and 16 single-ended or eight differential Discrete I/O channels.

In addition, the TM102 provides a header for each of the C102's PMC sites, enabling attachment of cables to the PMC I/O.

The TM102 also provides jumpers to enable I/O routing for the C102 shared I/O pins as well as interface type customization for serial I/O interfaces.

Specification

Interface

FeaturesTransition Module for use with Aitech's C102 dual PowerPC 7448 VME SBC
Provides Standard Connections for C102 I/O Interfaces
80mm Rear Module Depth, Fully Compliant with IEEE 1101.11
No Active Components
Configuration Jumpers Available for I/O Routing Configuration
Two Versions Available: - Complete Front Panel Kit, including Front Plug-in Unit, Rear Backplane Adapter, and High-Quality Twisted-Pair Flat Cables - Rear Plug-in Unit
Both Versions available in either Single-Slot or Double-Slot Configurations

General

ElectricalN/A - no active components
MechanicalBackplane Adapter- per IEEE 1101.11 80mm depth type.
Single-slot Transition Module – per IEEE 1101.1 Single slot front panel.
Double-slot Transition Module – per IEEE 1101.1 Double slot front panel.
Conformal CoatingConformal coating on request
TemperatureSeries-100 Commercial
• Temperature range (operation): 0 to +55C
• Temperature range (storage): -40 to +85C

Series-200 Rugged
• Temperature range (operation): -40 to +71C
• Temperature range (storage): -50 to +100C

Series-400 Military
• Temperature range (operation): -55 to +85C
• Temperature range (storage): -62 to +125C

Ruggedization level is determined in the part numbering scheme - refer to datasheet for further details
HumiditySeries-100 Commercial: 0-90%
Series-200 Rugged, Series-400 Military: 0-95% or 0 to 100% with coating
AltitudeSeries-100 Commercial: 15,000ft
Series-200 Rugged, Series-400 Military: 70,000ft
VibrationSeries-100 Commercial
• Random (g2/Hz): 20-2000Hz/0.02 g2/Hz
• Sine (g PEAK): 10-100Hz/2g

Series-200 Rugged
• Conduction-cooled: Random (g2/Hz): 20-2000Hz/0.1 g2/Hz
• Conduction-cooled: Sine (g PEAK): 50-500Hz/10g
• Air-Cooled: Random (g2/Hz): 20-2000Hz/0.04 g2/Hz
• Air-Cooled: Sine (g PEAK): 10-100Hz/2g

Series-400 Military
• Conduction-cooled: Random (g2/Hz): 20-2000Hz/0.1 g2/Hz
• Conduction-cooled: Sine (g PEAK): 50-500Hz/10g
• Air-Cooled: Random (g2/Hz): 20-2000Hz/0.04 g2/Hz
• Air-Cooled: Sine (g PEAK): 50-500Hz/5.5g
ShockSeries-100 Commercial: 20g/6mS
Series-200 Rugged: Conduction-cooled: 40g/11ms, 100g/6ms
Series-200 Rugged: Air-Cooled: 30g/11ms, 75g/6ms
Series-400 Military: Conduction-cooled: 40g/11ms, 100g/6ms
Series-400 Military: Air-Cooled: 30g/11ms, 75g/6mS
Warranty1 Year
RoHSCompliant

Ordering Details

BoardRefer to datasheet for ordering part number scheme
AccessoriesN/A