Call us: +44 (0)1634 300900 | E-mail: sales@dpie.com

Diamond Point International

Aitech TM162 - Transition Module for C162 & C163 VME SBCs

Eliminates Need for Harnessing and Complex Cabling With C162/C163 I/O Interfaces

Introduction

Aitech’s TM162 transition module is designed as a supplement to the C162 and C163 6U Core™ i7 VME SBCs, and intended for use in commercial air-cooled enclosures. The TM162 eliminates the need for harnessing and complex cabling fixtures when connecting to the various C162/C163 I/O interfaces. 

The TM162 is designed for use with enclosures with a rear module depth of 80mm, and is fully compliant with the IEEE 1101.11 specification. It may be adapted for use with enclosures whose rear module depth is greater than 80 mm by adding an extender (not included).

In addition, the transition module provides two high speed connectors for convenient access to I/O signals for XMC/PMC mounted on the C162 and C163  SBCs.

The transition module also provides jumpers to allow I/O routing for the C162/C163 shared I/O pins.

Specification

Interface

FeaturesXMC/PMC I/O
• A high speed connector on the TM162 PCB provides convenient access to all of the I/O pins for XMC/PMCs mounted on the C162/C163

Reset Push button
• The transition module has a reset pushbutton on the front panel (only in the two slot version).
ConnectionsThe transition module provides standard connectors for the C162/C163 I/O interfaces. Refer to the PDF datasheet for detailed I/O availability and connector types for the single and double-slot versions of the TM162.

Provides standard I/O connectors for all the C162 and C163 I/O interfaces
• 80mm Module Depth Fully Compliant with IEEE 1101.11
• Six modular USB 2.0 type A connectors
• Two 7-pin SATA connectors
• Four modular RJ-45 GbE jacks
• Four DB-9 connectors for the serial ports
• Two DVI-I jacks for the DVI and RGBHV interfaces
• DB-9 connector for the two CANbus ports
• Stereo jack for stereo line-out audio
• Stereo jack for stereo line-in audio
• 14-pin 90° header for 12 discrete I/O channels (6 differential pairs)
• Configuration jumpers enable I/O routing for the C162 or C163 I/O pins.

General

ElectricalN/A - no active components
MechanicalStandard 80mm mounting depth per IEEE Std 1101.1
Double-slot Transition Module – per IEEE Std 1101.1 Double slot front panel.
Conformal CoatingConformal coating on request
TemperatureSeries-100 Commercial
• Temperature range (operation): 0 to +55C
• Temperature range (storage): -40 to +85C

Series-200 Rugged
• Temperature range (operation): -40 to +71C
• Temperature range (storage): -50 to +100C

Series-400 Military
• Temperature range (operation): -55 to +85C
• Temperature range (storage): -62 to +125C

Ruggedization level is determined in the part numbering scheme - refer to datasheet for further details
HumiditySeries-100 Commercial: 0-90%
Series-200 Rugged, Series-400 Military: 0-95% or 0 to 100% with coating
AltitudeSeries-100 Commercial: 15,000ft
Series-200 Rugged, Series-400 Military: 70,000ft
VibrationSeries-100 Commercial
• Random (g2/Hz): 20-2000Hz/0.02 g2/Hz
• Sine (g PEAK): 10-100Hz/2g

Series-200 Rugged
• Conduction-cooled: Random (g2/Hz): 20-2000Hz/0.1 g2/Hz
• Conduction-cooled: Sine (g PEAK): 50-500Hz/10g
• Air-Cooled: Random (g2/Hz): 20-2000Hz/0.04 g2/Hz
• Air-Cooled: Sine (g PEAK): 10-100Hz/2g

Series-400 Military
• Conduction-cooled: Random (g2/Hz): 20-2000Hz/0.1 g2/Hz
• Conduction-cooled: Sine (g PEAK): 50-500Hz/10g
• Air-Cooled: Random (g2/Hz): 20-2000Hz/0.04 g2/Hz
• Air-Cooled: Sine (g PEAK): 50-500Hz/5.5g
ShockSeries-100 Commercial: 20g/6mS
Series-200 Rugged: Conduction-cooled: 40g/11ms, 100g/6ms
Series-200 Rugged: Air-Cooled: 30g/11ms, 75g/6ms
Series-400 Military: Conduction-cooled: 40g/11ms, 100g/6ms
Series-400 Military: Air-Cooled: 30g/11ms, 75g/6mS
Warranty1 Year
RoHSCompliant

Ordering Details

BoardRefer to datasheet for ordering part number scheme
AccessoriesN/A