- Key Features
- Rugged 6U VME Single-Slot SBC
- Freescale PowerPC QorIQ Multicore SOC
- VME64x per VITA 1
- 4GB DDR3L with ECC
- 1 SATA, 6 COM ports
- 4x Gb Ethernet, 2 USB
- 1 XMC and 1 PMC
- Up to -20 to +60C operation
The C111 is Aitech's new generation VME PowerPC SBC, based on Freescale's new T4 Series QorIQ System-on-Chip (SoC) multi-core, multi-thread processors, with on-chip high speed L1 and L2 caches, and numerous integrated bus, memory, and I/O controllers.
C111 memory resources include large and fast DDR3 SDRAM, NOR Flash for firmware, user application, and data storage, MRAM for user/application specific parameter storage, and a high-density NAND Flashdisk for mass storage.
Integrated on-board I/O resources include Gigabit Ethernet, USB 2.0 ports, MIL-STD-1553, SATA 2.0, serial ports, and general-purpose discrete I/O channels.
The C111 is VME64x compliant per VITA 1, and supports VME advanced protocols such as 2eSST and 2eVME while maintaining full compliance with legacy VME operation.
To complement its extensive capabilities and provide extended resources and flexibility, the C111 is equipped with two industry standard PMC/XMC slots.
The C111 mechanical and electrical design guarantees its operation over the full range of rugged application environments.
|CPU Spec||Freescale T4080 Quad-Core Dual-Threaded QorIQ SoC @ 1.5 GHz|
• Integrated memory, bus, and I/O controllers
• 128-bit Altivec Unit
• 12 MB L2 cache
• 32 kB/32 kB L1 Data/Instruction Cache
|Memory||4 GB of DDR3L SDRAM with ECC operates at 1600 MT/s, configured in dual channels|
|Network||Four Gigabit Ethernet Ports (two front, two backplane)|
|Storage||128 MB NOR Flash - 64 MB allocated for Boot; 64 MB available to user|
1x SATA 2.0 (backplane)
|USB||Seven USB 2.0 Ports|
|Serial||6 Serial Ports – Standard: RS-232/422 (two front, four backplane)|
|Other||8 Discrete I/O Lines – Single-Ended (backplane)|
|Expansion||VME64x per VITA 1|
1 PMC Slot 64-bit PCI @ 66/33 MHz, supports 5 V PCI I/O signaling levels
1 XMC Slot Connects to CPU subsystem through PCIe x4 port, supporting x4, x2, and x1 bus widths
|Electrical||Consumption: Typical 33 W, maximum 45 W|
|Mechanical||Air-cooled 6U VME per IEEE Std 1101.10-1996|
Dimensions per IEEE Std 1101.10-1996
|Conformal Coating||Conformal coating on request|
|Software||WindRiver VxWorks®, Linux®, and Green Hills INTEGRITY® are supported|
|Temperature||Temperature range (operation, Ai-VM111S): 0 to +50C |
Temperature range (operation, Ai-VM111S-E): -20 to +60C
Temperature range (storage): -40 to +85C
|Humidity||0 - 90%|
|Weight||< 675 g (1.5 lbs)|
|Vibration||5 - 100 Hz, 0.04 g2/Hz|
|Shock||Operating: 20 g/11 ms half-sine|
|Board||Refer to datasheet for ordering part number scheme|
|Accessories||TM102 Transition Module|